- Thread starter Gazzt
- Start date
- Replies 8
- Views 1K
- chimney technology
Discuss Russian chimney sweep new technology in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Messages
- 8,642
I thought it was a chainsaw and he was going to cut the flue off lol
Gazzt
Esteemed
- Messages
- 191
0-1 on the smoke pump at the end lol
- Messages
- 6,157
That's the way to do it another mm of ozone gone .
- Messages
- 3,310
There would be less impact on the environment cleaning the chimney like that, than having the house burn down.
- Messages
- 4,817
All the kids in the nearby School now have black lung, and go home looking like Oliver twist. Might as well go back to sending them up chimneys eh? Although that one would be a squeeze.
- Messages
- 10,444
Surface dust removed. Check.
Reply to Russian chimney sweep new technology in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi,
I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two?
Cheers,
Peter
-
- Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications.
Just reply to this thread...
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it is earthed. The new tap will use flexible tails and so will not be earth bonded. My initial search for information suggests that there is no legal...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
-
-
-
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 2
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 2
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 3
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 5
-
Show us your fanciest radiators you have installed!!
- Started by Lou
- Replies: 2
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 7
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
