Search the forum,

Radiator Valve Caps Replacements

Discuss Radiator Valve Caps Replacements in the Plumbing Jobs | The Job-board area at PlumbersForums.net

J

JayKay70

Messages
51
Hi all,

I am looking for a place to buy Radiator Valve Caps.

Picture 1: Got 1 radiators with no caps
Picture 2: Got 4 radiators with this cap
Picture 3: Got 3 radiators with this cap
Picture 4: No cap but the pin is different size compared to picture 1

Picture 1, each pin is 15mm high and 6mm thick at the top
Picture 4, pin is 10mm high and 6mm thick at the top

On each radiator i also have a Drayton TRV4

I am just looking to replace each one so there is some uniformity, right now it's all over the place:eek:

Preferably chrome ones if possible, if not than white ones.

Any ideas?

All the best

Jay

View attachment Diagram.jpg
 
It’s very important to make sure rad valve caps are fitted, little people can fall small heads fit into corner between wall and rad. Brass head then penetrates child forehead ouch ! My surveyed friend fails rentals for letting if rad caps are missing for this reason. Rob Foster centralheatking
 
First 3 photos are of Peglers Terrier older type valves.
I actually have some spare used heads for them, lockshield and wheel head.
The forth valve is one of the standard cheap valves
You can also get sets of universal heads that might sort it.
 

Reply to Radiator Valve Caps Replacements in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

R
Broken Radiator Valve, what's the solution?
Hi Everyone, The metal spindal on the top of one of our radiator valves is snapped off and the radiator is always off, is there a quickish fix for this or will I have to drain the whole system to replace it, pictures inculded, thank you!!
Replies
19
Views
1K
RalphMartins
R
P
Replacing a radiator and Valves
Hi All, I need to replace a radiator in the kitchen, the 10mm copper has split so using this opertunaty to replace it with a towel one and also need to remove both valves and make the pipes shorter. Its a gravity fed system and the last radiator in the system , I have a bung kit, i know i can...
Replies
3
Views
366
PatBoySlim
P
C
Some radiators not hot
Hi all, Looking for some advice please. Got a building, all one level with 7 radiators. 3 individual ones in separate rooms then 4 radiators all together in one large room. The issue is with the 4 radiators in the large room. Basically not getting hot, the first 10% of the radiator is...
Replies
2
Views
280
ShaunCorbs
ShaunCorbs
FRAM777
REPLACEMENT BLENDING VALVE
I need to replace a 3/4 or 22mm blending valve on a Telford Trident electric hot water boiler. see attached picture of the original part. Telford asked me 100£ for the part and refused to provide the technical details. I am pretty confident this is not a proprietary part and similar parts...
Replies
4
Views
385
ShaunCorbs
ShaunCorbs
P
3 way valve replacement
Hi I'm going to replace the 3 way vale on my open heating system. Hoping someone can advise. In the picture, to isolate the valve I am going to turn off 1, 2 & 3. However as you can see I can't turn anything off between the valve and the hot water tank. If I use a bung in the header tank, will...
Replies
1
Views
356
Paul Plumb
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock