Search the forum,

Cannot get shower riser rail off

Discuss Cannot get shower riser rail off in the Plumbing Jobs | The Job-board area at PlumbersForums.net

G

Geezer

Messages
2
Hi there.

I got this shower from b and q and the shower head holder is slipping. My plumber put it in so I don't know how it fits together and I can't get it off ( I don't want to force it). I am guessing that the top or bottom bracket will come off. I asked at b and q but they couldn't help. It is 3 years old.

Can anybody tell me how to get it off to tighten the shower head holder?

image.jpeg


image.jpeg
 
My guess would be use a thin edge knife or similar to pop off the light grey rectangle on the bottom bracket. That will probably reveal a screw
 
any allen keys on the small flat ends?
 

Reply to Cannot get shower riser rail off in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Grohe vitalio joy 260 shower rail too long
We've just purchased a grohe vitalio joy 260 not realising the shower riser rail is not adjustable and it is too long/tall for our shower it hits the ceiling. Grohe say you cannot cut the rail/pipe and must purchase a smaller one off them.. has anyone cut one shorter before and been ok?
Replies
1
Views
278
Ben-gee
B
P
Replacing AquaLisa Q Pinch Grip Holder
I own a Aqualisa Q shower but the pinch grip holder has broken but how to do get the bottom part off (see attached) so I can feed the new replacement part on to the shower rail? Any help or advice would be most appreciated.
Replies
1
Views
2K
cjg
C
P
My shower won't turn off after replacing the thermostatic cartridge.
I've just replaced an Ultra SASF2 – M thermostatic shower cartridge together with the spring mechanism and the temperature sensor. My problem is this: If I install the thermostatic cartridge together with the spring mechanism and the temp sensor (i.e. do the job properly), the shower runs warm...
Replies
0
Views
537
Phil the Fluter
P
boxer01
How to remove siliconed rail off tiled bathroom wall
Please can someone tell me the best way of removing a siliconed folding support rail that has been siliconed to a tiled bathroom wall at my mums. I can't get a hacksaw blade in between the wall and the plate and I can't get any thin windscreen cutter wire in as there is no gap. I don't really...
Replies
4
Views
372
boxer01
boxer01
S
Gravity or mains shower?
I have a dead 1990s Triton T70 shower and, for purposes of replacement, I'd like to know if it's mains or gravity fed. As it won't even switch on, I cannot get any water out of it so I can't just switch off water at mains and see if water still flows from the shower. I note that current Triton...
Replies
2
Views
344
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock