Search the forum,

Discuss Glow worm bypass seals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,167
Hi folks, anyone know what seals I need for the boiler below. Cannot find out if it is just the o'rings or seals as well.

Cheers

20181115_133619.jpg


20181115_133531.jpg
 
Cant say for definite on this model, but the divertor valve / bypass normally on the valiants/glowworms have two slightly square(flat one side) shaped o-ring seals cant help you with part number though just been to the van i have one in there but no part numbers on the exploded diagram.... useful.
 
Cant say for definite on this model, but the divertor valve / bypass normally on the valiants/glowworms have two slightly square(flat one side) shaped o-ring seals cant help you with part number though just been to the van i have one in there but no part numbers on the exploded diagram.. useful.


Thanks. Turns out in the end all it needed was to be tightened up a tad more. Well, no call backs as of yet any way
 

Reply to Glow worm bypass seals in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Got back from a week visiting family over Xmas and our boiler has now started making banging and grinding noises. It’s a British Gas 330 which is a Glow Worm boiler.
Replies
1
Views
247
Can anyone tell me of a boiler equivalent to a Glow worm micron 30ff. I am not sure what one I should get?
Replies
5
Views
656
Went to a customer today their glow worm Ultracom 24 HE goes to fire up then cuts out turning the heating pump off, then does the same again before firing and running. Occasionally shows the flame is lit on display but flow temp doesn’t go much past 26. Then if you turn off and try again...
Replies
5
Views
305
The flue for a glow worm micron 30ff is apparently obsolete but there must be other flues that would fit it surely, it's just a standard 100mm horizontal flue right? I mean when a bg gas engineer tells you that you'll have to change the whole boiler as well because you can apparently no longer...
Replies
7
Views
593
Hi I have a Glow-worm back boiler which is giving me grief (I would have upgraded it by now but its a listed building and there's issues with venting through the external wall and I'm reluctant to go with an electric boiler instead (because of the consumption cost)). It's a sealed system. The...
Replies
6
Views
406
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock