Search the forum,

Anyone interested in 2 or 3 night's plumbing work in Manchester?

Discuss Anyone interested in 2 or 3 night's plumbing work in Manchester? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

J

Jim Goodenough

Esteemed
Plumber
Messages
653
Commercial plumbing work: Working hours are 22:30 to 10:00 at the Trafford Centre - starting either next Sunday 11th or Monday 12th for 2 or 3 nights.

If interested please PM me.
Cheers Jim
 
Jim Goodenough said:
Commercial plumbing work: Working hours are 22:30 to 10:00 at the Trafford Centre - starting either next Sunday 11th or Monday 12th for 2 or 3 nights.

If interested please PM me.
Cheers Jim
Click to expand...
I will ask some of my old crew do,they need cards etc, what sort of stuff...copper metal hvac ? High up or ground level , labour only ?
 
Rob Foster said:
If you want some fellas you need to work fast,all bar 1 of my boys are at Hinckley Point in somewhere near Bristol for next 4 years
Rob Foster aka centralheatking
Click to expand...

At the power station ?
 
ShaunCorbs said:
At the power station ?
Click to expand...
Of course they all started at camel lairds at Birkenhead and did someboats at barrow, so who do you get to,join serious pipes full of hot sodium and high pressure steam etc the one in ***bria is stuffed, but also we do the odd diesel local generation set up .just the fuel lines , there you go you asked , most of my drinking pals are are at sellafiekd mon 2 Friday taking the stupid thing apart Rob Foster
centralheatking
 
Last edited:

Reply to Anyone interested in 2 or 3 night's plumbing work in Manchester? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I
Bristan TS1203 EH C Reversed Plumbing
Old shower (20-30 years) had a Mira Excel installed that split in the inlet - not repairable from what I can see as the inlet pipe is now separated from the main body. On removal I found a number of issues with the installation. 1) Pipes are buried in the wall and tiled over 2) Hot is Right /...
Replies
8
Views
763
IanInDorset
I
R
Unsolvable water hammer when shutting taps
I have read a few threads including one by Debbie Stano that were similar to my issue but that thread stopped a while back without any resolution I could see. I'm in Brisbane, Australia but I'm after general ideas from anyone here or in UK (I realise this is a UK based site). Point form...
Replies
1
Views
958
Lou
Lou
C
26 and trying to get back into the Plumbing industry with a Level 2 + 3 C&G. Finding it difficult! Please help.
Hi everyone I really hope you can help me. I'm 26 now and live in London, I've been doing a bit of career hopping since leaving school at 16 in 2011. The first thing I done after secondary school was gain my Domestic Plumbing and Heating City and Guilds Level 2 and then 3 at college. However...
Replies
5
Views
2K
SimonG
SimonG
ecm200
Installing a Drayton Wiser 3 kit with an S plan 2 zone CH + HW system
Objective: I have an existing s-plan plus (see below for details) heating and hot water system, with 2 independent heating zones. There is a separate programmer and a simple room thermostat for zone 1 and programmable thermostat for zone 2. I have purchased the Drayton Wiser 3 zone kit and...
Replies
1
Views
3K
ecm200
ecm200
I
Is commercial plumbing a good move for a level 2 plumbing & heating diploma trained adult going through a career change?
I am currently going through a career change to be a plumbing and heating engineer. I have completed a year long plumbing and heating diploma level 2 at college and have signed up with a assessor at the college. It has been hard to find a placement as most plumbers either don't want the...
Replies
19
Views
5K
gmartine
gmartine
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock