Search the forum,

Worcester cdi classic

Discuss Worcester cdi classic in the Plumbing Jobs | The Job-board area at PlumbersForums.net

M

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,167
Hi all. Hope you had a good week.

I got the above boiler which keeps going to lock on only in hot water. Occasionally it lights when the heating is on and you turn it on. Got some new probes for it but anything else you think it could be.

Cheers
 
So looking this up it seems you can just use a pencil and this fixes it?

Not gas related but I am in need of some Mcalpine T29-LN's anyone know who stocks them as I cannot really wait for delivery.

Cheers
 
city should have them or bss
 
So It doesn't look like I will get those T29's by tomorrow. Can anyone recommend an alternative to connect to a 1 1/2 waste that does not need a trap.

It is for connecting to waterless urinals. Cheers
 
scott_d said:
I'm sure they do an 1-1/4 & 1-1/2 hepvo
You can get bent or straight adapters.
In fact I have one on my bath tub
Click to expand...

yea arnt the adapters 11/4 to 40mm tho? havent use one in ages so might be miss remembering
 
ShaunCorbs said:
arnt the inlets only 11/4?
Click to expand...

You would have thought so, but for some reason this perticular model is 1 1/2. I tracked down a supplier of the T29-LN and got them delivered special delivery. Also ordered some of the 1 1/4. All arrived today but no T29-LN. grrr.

I have so many jobs that are just not getting finished for some reason or another and it is literally making me want to go pop
 
mutley racers said:
You would have thought so, but for some reason this perticular model is 1 1/2. I tracked down a supplier of the T29-LN and got them delivered special delivery. Also ordered some of the 1 1/4. All arrived today but no T29-LN. grrr.

I have so many jobs that are just not getting finished for some reason or another and it is literally making me want to go pop
Click to expand...
Happens to us all mate. Keep your chin up
 
So here is the answer.

Black dust: pipework and gas valve full.

New carcass and good to go. Thanks all for help

IMG-20181101-WA0011.jpg


IMG-20181101-WA0012.jpg
 
Gas pressure must of been non existent?
 
It was actually fine the 1st time I was there but only there for quick due to it being an evening. Then when I went back I had it on for longer and it shot right down to 4mb!! Where does this stuff come from as I did some work on this a month ago and pressure was fine
 
mutley racers said:
It was actually fine the 1st time I was there but only there for quick due to it being an evening. Then when I went back I had it on for longer and it shot right down to 4mb!! Where does this stuff come from as I did some work on this a month ago and pressure was fine
Click to expand...

In short it's the gas dust aka Hydrogen sulphide

It's recommend to fit a filter before the boiler if it's that bad / had problems before
 

Reply to Worcester cdi classic in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

H
Secondary non-return valve
Worcester Bosch Greenstar 30 CDi Classic System ErP, Underfloor heating and DHWSystem. I have non return valve in the secondary return before the pump (DAB 65/150-3) which constantly rattles when the pump is running. Its been tried in both the horizontal and vertical modes with no effect. The...
Replies
5
Views
3K
John.g
J
Hobo128
Worcester G* Cdi 37kw... Luke warm DHW
Hi guys... Happy New year to you all.... Been out to a Worcester Greenstar Combi last week.... Problems with hot water not getting very hot.... Boiler is set to max on and I'm getting about 40 degree out of the tap.... Turned of the flow and return at the boiler to check diverter but this made...
Replies
4
Views
634
Hobo128
Hobo128
C
Worcester Greenstar Boiler
We have two issues. I suspect that they are not actually problems – the heating work fine. Worcester Greenstar CDi. Installed in unheated garage. Protected by Honeywell pipestat and froststat. 1. The garage was cold (approx. 7° C). The room thermostat had demanded heating and the...
Replies
6
Views
2K
Knappers
K
C
Worcester CDi error code
Hi I am new to this forum and looking for some help with an annoying issue with my Worcester CDi boiler ( installed about 2010 ). It provides heating and hot water ( through a separate lagged water tank). Over a year ago it started going into a mode for a number of minutes before it then...
Replies
6
Views
2K
Vee
V
L
Worcester 15ri Issues
Hi, i was wondering if somebody could give me some advice..... I was called out to a boiler breakdown the other day. Worcester 15Ri. When i arrived onsite the blue light was flashing i put it into reset, fan started, boiler ignited . Boiler reached temp very quickly and shut down on overheat. I...
Replies
3
Views
1K
Leeukguy
L
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock