Search the forum,

Worcester Greenstar 37 CDi Combi

Discuss Worcester Greenstar 37 CDi Combi in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Harvest Fields

Harvest Fields

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
10,444
Just walked into this, first time I have been here. 4 bed semi, 1 bathroom, 1 ensuite, 1 WC. I do not want to touch the thing. Ohh and the cover plate for the heat ex is t secured and moves all over the place. Tried to upload a video but it will not let me do pics will have to do.

7AA19CDA-6CBA-4929-B63A-13905B6BD3E7.jpeg


DA830F9A-F26A-4F8F-BDCF-1CE28448EF05.jpeg


5C546F9E-D98C-4617-8E43-89E5835E2B3F.jpeg
 
New boiler

Sparky still got glass ?
 
No glass in the electrodes just steel.
Never had one this bad. Other than a new boiler? What you thinking?
New sump and seal new electrodes and leads as earth lead really loose and pulls off with no effort. New sensor for heat ex as clip heat damaged. Not even tested it yet.
 
If they want a repair

Yea looks like it's been changed so it's had work on it in the last 2 years ish

Case damage or just badly looking ?

Don't forget about the case seal
 
I would price up a repair but also price for a new boiler with warranty
 
Harvest Fields said:
I’m going to repair the seal on the cover plate and test. Will definitely price both options. But want it tested first. Never done a sump before? 2 hours?
Click to expand...

Yea I'd everything goes ok but I would pressure wash the hex if it hasn't been serviced before
 

Reply to Worcester Greenstar 37 CDi Combi in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
1
Views
78
Gasmk1
Gasmk1
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
0
Views
53
Splitty
S
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
301
Chuck
C
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
4
Views
382
Timmy D
T
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
163
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock