Find plumbing advice for free on PlumbersForums.net. Ask plumbing questions to the thousands of professional plumbers and gas engineers on the forum around the clock.
Plumbing Advice and Gas Engineer Forum for the UK, USA, Australia, Canada, New Zealand and other English-speaking countries.
We’ve switched the forum over the PlumbersForums.net, head straight over there and your old login details will work just fine. If you’ve not registered before, it’s free to do, takes 30 seconds. And can really benefit you whether you’re a weekend warrior bashing a bathroom, or a professional gas engineer looking for like-minded plumbers to share knowledge, skills and advice.
UK Tiling Forum is the UK’s wall and floor tiling forum.
Talk Electrician Forum is ElectriciansForums.net
Join PlumbersForums.net and get discounts on plumbing supplies
Free to join and register to. Gain lots.
Latest Forum Threads
- Hi, This is my first forum posting ever so forgive me if I'm not clear. A few years back I put an addition onto my kitchen and ended up moving the sink. It seems that at about that time every once in a while our dishes would smell like sewer. We had a new septic […]
- Plumber says the heat exchanger aluminium baffles are breaking down and blocking the pipe which he showed me,now the question is do I change the heat cell or go for a new boiler. My boiler is 13 years old.
- Hi, Can anyone suggest the best way to fit a bath screen wall profile when the silcone at the bottom is sitting proud at the bath edge and prevents the profile from sitting flush . Cutting the silcone back slightly has caused slight leaks behind the bath.
- There seems to be a big shortage of duel flow kitchen taps, I know the trend is towards combis but there is still a lot of flats/bungalows with poor hot water pressure which means you need a duel flow tap. Any one got a good supplier of them? Thanks
- Hi looking at a Triton Mersey concealed thermo which has thrown a third cartridge in 8 yrs! now discontinued looking to replace with a manual mixer concealed or surface mount. Not bothered about loosing the fixed head, could go for a hose/rail. I believe centres for the feed pipes is 170mm. Trying to come up […]