Search the forum,

Recent content by Watts

  1. W

    Water hammer/vibrations

    Worn out diaphragm washer in fill valve usually causes water hammer
  2. W

    what percentage of fitters own a powerflush machine

    Any recommended brands for power flush machines? Looking to invest in one myself.
  3. W

    Tap Cartridges - Impossible situation

    Your local plumbing merchants will have their own standard range of taps if you go in and see them. Take a couple photos with you. What happened to the cartridges?
  4. W

    Tap Cartridges - Impossible situation

    Agree if it was my job new taps would have been in days ago
  5. W

    Problem with rising main tap connections

    Well yes if there is backflow prevention and every point of use then not necessary. I was always taught to fit one on incoming main and have carried that on.
  6. W

    Problem with rising main tap connections

    Incoming main needs a protection against backflow
  7. W

    Problem with rising main tap connections

    Also there should be a double check valve fitted between the lever valve and the drain cock
  8. W

    Tap Cartridges - Impossible situation

    is there a manufacturers name on the taps/cartridge?
  9. W

    Hello there everyone

    Haha I like it, I’ll keep an eye out for that one Cheers
  10. W

    Hello there everyone

    Nope, Scotland
  11. W

    First FGA, Regin One click

    Done this myself, saved up for a kane and rented from Plumbase. £10 a day just add it to the price of the job. With analysers I’d say save up for a good quality kit. You’ll regret getting a cheaper one IMO.
  12. W

    Hello there everyone

    I’ve read the forum for a while now and it’s probably time to start contributing! Plumbing and heating, registered with gas safe. Employed atm with view to go self employed in the coming years. Hope the weekend has been good to you all, Cheers!
  13. W

    Problem with rising main tap connections

    IMO lever valves are much better than brass stopcocks, fit quite a lot of them now. And copper into the vlave is more than OK if its fitted properly.
  14. W

    Lagging cutter. New invention

    Hacksaw will do then
  15. W

    Lagging cutter. New invention

    Leaves a very neat professional job I'm quite impressed. It comes with a toothless saw which will probably get lost in the van but it makes a brilliant looking cut.
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock