Search the forum,

Recent content by wasilewski

  1. W

    Can I use a Franke tap with a Carron sink?

    Cheers, I should be all sorted then. :)
  2. W

    Can I use a Franke tap with a Carron sink?

    Hey, if it fits it works, right?
  3. W

    Can I use a Franke tap with a Carron sink?

    I'll post pictures if it helps. Not sure about pressure, I'd say we have high pressure as we have gas and the water supply comes direct from the mains to the house. I dont know what flow is. I'm assuming most taps have the same fittings and are a standard size?
  4. W

    Can I use a Franke tap with a Carron sink?

    thanks, Dave. Happy New Year to all!
  5. W

    Can I use a Franke tap with a Carron sink?

    Hello there! I have a Carron sink and tap in my kitchen and I'm wondering if I can replace the Carron tap with a Franke tap? Many thanks!
  6. W

    Vaillant Ecotec Pro 28 pressuring dropping - due to Magnaclean?

    11 and when the heat is on they are always on full.. Would that make a difference maybe?
  7. W

    Vaillant Ecotec Pro 28 pressuring dropping - due to Magnaclean?

    Thanks @townfanjon. There's no way I'd touch the boiler myself, the only thing I do is refill it and check the pressure. What should the pressure rise by if it starts off at 1? Should it rise up to 2 or something like that?
  8. W

    Vaillant Ecotec Pro 28 pressuring dropping - due to Magnaclean?

    Thanks @townfanjon. out of interest, what should the pressure be after 5 hours of having the heat on if the original pressure was 1?
  9. W

    Vaillant Ecotec Pro 28 pressuring dropping - due to Magnaclean?

    It's sitting at 2.2 now. The heat has been in for about 5 hours. I can give you a more accurate 30 minute reading tomorrow. Cheers. I just checked them and they are all ok. The chap who installed the Magnaclean did bleed all the radiators after he installed it a second I saw him. I did...
  10. W

    Vaillant Ecotec Pro 28 pressuring dropping - due to Magnaclean?

    After the heat has been on half an hour? Not sure, the heat has been on for a few hours so I can't check right now I'm afraid.
  11. W

    Vaillant Ecotec Pro 28 pressuring dropping - due to Magnaclean?

    In January 2018 we had a new diverter valve fitted to our Vaillant Ecotec Pro 28 by an official Vaillant repairman. After this we had a Magnaclean 2 fitted by our gas installer. I had checked the water pressure on the Vaillant and it appeared to be OK, around 1.1 after the installer fitted the...
  12. W

    Can I flush toilet / run water etc during power cut?

    Brilliant, thank you! I just didn't want to do anything that might damage my boiler. Thanks again. :)
  13. W

    Can I flush toilet / run water etc during power cut?

    Hello, We are in the middle of a power cut at the minute and I'm wondering if running water to make tea, or even flushing the toilet, will put any extra strain on my Ecotec Pro 28 combi boiler? Many thanks.
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock