Search the forum,

Recent content by PhoenixServices

  1. P

    Ideal heat 24 boiler

    I fit a lot of ideals and changed about 5 sumps (not on my installs) they leak out of the case before any damage can be done. Only does damage if the customers just ignores the leak. But it does annoy me that they are not acknowledging the sump issue.
  2. P

    Time for a new hot water cylinder? (foam cracks and bulges)

    Also your cylinder immersions are side entry so once you have got the immersion cracked(moving) drain it from the drain point to below the immersion level. (Scoop out any scale if there is any when you change it and make sure you get the right type of immersion for your water hardness)
  3. P

    Programmable room thermostat for ideal logic

    Yeah that was me. It didn’t show it had posted to me and I didn’t get any notifications for the replies. Sorry about that. This one can be deleted if need be.
  4. P

    Programmable room thermostat for ideal logic

    hi guys. After recommendations for a programmable room thermostat. Preferably wired and if possibly weather compensation. It is going on a older model ideal logic combi.
  5. P

    Best programmable room thermostat for old idea logic

    hi guys. Customer is after a good programmable room stat for an old ideal logic. Preferably wired and preferably able to have weather compensation aswell. Thanks guys.
  6. P

    Push Fit Fittings and rotating

    Should be able to lift it off the brackets whole. Have a helper, buckets and towels and know where your water turns off just in case
  7. P

    Water hammer/vibrations

    After some advice guys. Don’t know if I’m barking up the wrong tree, got a property that I fitted a Worcester in a couple of years ago. All been fine until last year when the new owners complained of water vibrations. The property had been empty before that. I fitted a shock arrestor and it...
  8. P

    Hot water 'back flowing' to header tank

    I find it fairly common but only ever worked in hard water areas. Oxfordshire and east Devon.
  9. P

    Where to place a magentic cleaner on this set up?

    Pipe 1 is a flow. Your return is the low level one with a drain valve. I reckon you could fit a 28mm Spirotech on the return to the boiler. If it is the one with the drain off on in your second picture. The Spirotech could act as the drain off.
  10. P

    Danfoss HIU Filling Loop

    If you disconnect the hose from the heating side and turn on the inlet does it come out of the hose. (Prove the hose is not blocked) If it’s not blocked, open the heating valve into a bucket to prove that opens. If that works it could be the heating gauge is faulty.
  11. P

    Gravity feed system sucking air open vent

    I’m now in Plymouth quite often if you need someone to take a look.
  12. P

    Help identifying component on gas supply pipe

    That’s for sgn to test from. Looks like they have capped it above that.
  13. P

    How does my heating system work? Very confused

    It’s possible your zone valve is faulty and stuck open. So when your heating comes on it heats the tank aswell. Next time the heating is on feel if the pipe above the silver box is roasting hot.
  14. P

    Room thermostat - replacement

    And balance the radiators so that it gives even temperature through out.
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock