My local rugby club are having intermittent pressure drop problems with their showers. I’ve done quite a lot of domestic plumbing but need advice on this. The system is set up with 4 large hot water storage tanks, there are 4 pumps each which have a flow sensors on them. There are 10 showers...
Thanks for your reply. I am planning to retrofit a system which uses a concrete milling machine to produce grooves into the top of the concrete to lay the pipe into. I have dug out a portion of the floor to check for insulation and there is 4" kingspan below the concrete slab (Floor construction...
Ok so I’ve done a load of research now and fully understand the need for the pump, blending valve and manifold.
I plan to also install a 2 port valve before the manifold feed, should I also install a 2 port valve to the central heating radiators feed? Otherwise, when the UFH calls for the...
I want to install an UFH zone into the existing floor of my kitchen. Can I channel the existing floor to install the UFH pipe work and back fill with concrete to maintain the same floor level? Also, I’ve seen UFH kits which include a manifold and pump etc Could I just connect TRV radiator valves...
I have had a gas engineer to carry out the work but is no longer responding to my calls or messages about the problem. I'm just trying to find out what the problem could be and tell him with the hope he will come back to fix!!!
I have Vaillant ecotec 838 with F32 fault. I have had the fan and PCB changed but still get the fault. When the fault comes up the fan is still running!! Any ideas?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.