Search the forum,

Recent content by johnf

  1. J

    The Gok oil priming pump

    The trouble with the Gok one I have found that as you pump it the think dances around too much and before you know it your mat and trousers have a liberal coating of Kerosene. I switched to vacuum pump bottle type things that HWOS sell with various attachements. They work really well and you...
  2. J

    Expansion vessel pump

    Same as Yorkshire Dave. SIP 24L air receiver. We charge it up, keep it in the van and its always there for recharging expansion vessels. Its easy, quick and works really well.
  3. J

    New Danfoss oil pumps / bypass screw

    I can't see any logic in doing that as most oil boilers run off a one pipe system as Best has said. Thanks for the heads up though. Good old Danfoss!!
  4. J

    Is there a Direct Open Vented Combi Boiler available on the market?

    I would not go down the route of a combi boiler here. Is it not possible to add a plate heat exchanger off the thermal store to provide hot water? That is providing there are spare tappins near the top of the store. It may be worth taking to the thermal store manufacturer.
  5. J

    Grant air adjustment

    I have had this a few times recently where the wrong nozzle is in the wrong box eg. 0.7580EH on the box and the actual nozzle is 0.6580EH for instance. This has only recently started to happen and we have known it on at least 4 nozzles in the last 6 months
  6. J

    Sweet smell from new warmflow B90HE

    It could be Loctite 577. Good stuff and the vapour is not harmful to my knowledge if there is a vapour from it! New boilers can often give off a strange smell for a few days.
  7. J

    oil boiler manuals

    Grant do an app with all past and present stuff. There is also a website called gotoplumbing where it is £30 a year for all the manuals you need.
  8. J

    Boiler vibrating since pressurising system

    Hello Jay I would get the engineer who did the work back to have a look. Without further information it is hard to say for sure but it could be air trapped in the boiler/system. Its hard to know for sure without being there.
  9. J

    Anton recalibration

    I don't know if they are able to just scrap your property after 10 days. It doesn't seem right. I would give them a call and speak to a manager and get some answers. I would not leave this to email as you probably wont get a reply. Its not good customer service though.
  10. J

    Unvented System, Caleffi Pressure Relief Valve Issue?

    Are you qualified to work on unvented cylinders?
  11. J

    relocate bath Faucet

    Wind up
  12. J

    relocate bath Faucet

    Hi are you from the US of A? We call them taps here!
  13. J

    New Boiler install

    Good one Tony. Glad to hear you got it sorted. I think they knew they were in the wrong.
  14. J

    Qualifcations

    I would be happy with that. Hate the things. I wouldn't have to get on roofs anymore except by if there is a scaffold
  15. J

    Unvented install on a combi

    Just check you have good enough flow and pressure on the water supply. Technically it sound.
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock