Search the forum,

Recent content by highlandbob

  1. H

    Camray 5 external problem

    I think I might have found the problem after spending £20o on a valve, actuator and new pcb I took the wall stat off to see if I could bypass it and noticed one of the lugs at the top that locate it to the backplate wasn’t in properly The socket back box used to fit the backplate is further in...
  2. H

    Camray 5 external problem

    I got a new pcb and just fitted it but no change :( A bit at a loss what to try next it’s had new valve and actuator and new pcb but still just heats the water and switches off doesn’t open the valve and circulate to the radiators unless you move the actuator lever lever manually if you do that...
  3. H

    Camray 5 external problem

    I got a new pcb and just fitted it but no change :( A bit at a loss what to try next it’s had new valve and actuator and new pcb but still just heats the water and switches off doesn’t open the valve and circulate to the radiators unless you move the actuator lever lever manually if you do that...
  4. H

    Camray 5 external problem

    Picking up a new pcb on Monday so hopefully it will fix the problem
  5. H

    Camray 5 external problem

    Any chance it could be the room stat before I order a new pcb ? If so how do I bypass it ? It’s a standard danfoss wall thermostat
  6. H

    Camray 5 external problem

    YesI bought the correct five wire cd actuator exactly the sand as the one I removed
  7. H

    Camray 5 external problem

    Pcb was what I was thinking but an expensive bit of kit I guess
  8. H

    Camray 5 external problem

    The limit stat only tripped once the first time, the next time it was the fuse on the circuit board blown but the limit stat was ok Programmer is telling the boiler to fire and it heats the water but if you do nothing the boiler will just keep the water hot but no heat to the rads unless you...
  9. H

    Camray 5 external problem

    I have a Camray 5 90BE external oil boiler which recently went off, I had a look and it needed thebreset switch pressing underneath the control panel then was ok for a week or so then went off again This time reset was ok but no power getting through I found the fuse on the circuit board was...
  10. H

    Oil problem causing lock out ?

    Oil in tank was checked pump pressure was set I don’t know the details as I didn’t set this All filters were checked and cleaned I googled this problem with pump failures and it looks like our local wholesaler was right as OFTEC we’re carrying our an investigation in to the failures here...
  11. H

    Oil problem causing lock out ?

    Hi all I have a warm flow boiler with a Riello RDB1 90-120 burner It started to randomly lockout some time ago and an engineer changed the photocell and solenoid without success I was told by the local plumbing wholesalers they had been supplying a lot of pumps recently for Riello burners as...
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock