Search the forum,

Recent content by hary_j

  1. hary_j

    Heatline Capriz 25 combi

    Thanks for that. Yes, I did ring their technical the first thing he tells me the model in question is too old for advice over the phone and I need to send an email, where another team will look into it further. What a bunch of idiots! I further told him I do need an imminent response not in 28...
  2. hary_j

    Heatline Capriz 25 combi

    I just loaded a second hand pcb, unfortunately it wasn't that.
  3. hary_j

    Heatline Capriz 25 combi

    Hi all, Went out to this one really late in the evening yesterday. When the boiler is switched on for CH mode, it takes on average 3-4 minutes for it to actually start the process. Once started the flames fully rise and begin to gradually go down and cuts out. From the time it fires up and...
  4. hary_j

    Expansion vessel leaking or blocked heat exchanger

    of course, we work together and always have been, don't do illegal work o_O never have done.
  5. hary_j

    Expansion vessel leaking or blocked heat exchanger

    Rad's aren't as warm as they used to be, which is what the customer has explained
  6. hary_j

    Expansion vessel leaking or blocked heat exchanger

    I've just recently qualified, although i've been doing plumbing for almost 14 years, my registration is in process with gas safe as we speak. Therefore i'm working with a close friend who is for many years, but isn't very technically minded on repairs unfortunately.
  7. hary_j

    Expansion vessel leaking or blocked heat exchanger

    Yep, did turn them back on, they were a little stiff, which worries me if they are maneuvering well enough. Banging, clunking n thumping, did return but it was a little milder. No rubber hoses on this, most likely the newer edition with solid plastic pipes
  8. hary_j

    Expansion vessel leaking or blocked heat exchanger

    Evening gentlemen, Stopped at my last job today, it was a vaillant eco tec plus 837 combi. Boiler is building excessive pressure, whether it be on DHW or CH mode. Upon firing up on CH mode, pressure rises to maximum and prv lets by at 3.5bar all within around 5-10mins of being operational. I...
  9. hary_j

    Help with identifying gas fire Make

    Is that for sure, because i have been told its got a switch on the bottom left for some background effect
  10. hary_j

    Help with identifying gas fire Make

    Evening guys, Can anyone help with the Make & Model of the gas fire shown? Excuse the blacked out image. Thanks
  11. IMAG0036a.jpg

    IMAG0036a.jpg

  12. hary_j

    Unusual radiator problem

    I was thinking about the expansion vessel and or pump, either add another expansion vessel or secondary pump.?? :(
  13. hary_j

    Unusual radiator problem

    problem is, the loft bedrooms are all under acoustic chipboards, ground floor is all under either tiling or solid wood flooring, 2 rooms are only carpetted, therefore i cant lift to see the piping layout
  14. hary_j

    Unusual radiator problem

    As far as i can see its 22mm, cascading down to 15mm as usual
  15. hary_j

    Unusual radiator problem

    33kw boiler not sure of pump size,
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock