Hello,
Work was undertaken in 2017 in which pipework from a new condensing boiler was routed through an external wall and then connected to the existing pipework of the underground copper oil feed pipe.
Should the system be pressure tested after completion.
If so, would it be tested at the oil...
hello, I have been informed that it may be due to a mechanical failure and thats all, but can't get my heat around what type of mechanical failure that would be. I presume that if something broke and it should move would heat be allowed to build up and ignite the pellets. A friend of mine...
hello,
Just a quick question, there has been a fire involving a Biomass boiler and I am just wondering what are the main issues with biomass boilers. Could a mechanical issue cause the fire as it has a auger fed pellet supply and the fire looks to be in the area of the motor and above (the...
That's what I thought but the temperature was about 11 degrees so I don't think that this was the case, but just can't think of any other reason for it.
I noticed a split had occurred in the centre of a in line connector, (orientated towards the top to bottom of ends) one end was connected to 15mm plastic pipe and 15mm copper at the other. The pipe work was connected to the water feed pipe into a water tank in the loft.
I traced the other end...
Hello,
I have found that the oil filter has separated (bottom bowl from main part) the inside of the main casing where the bolt attaches too has broken off.
And am wondering what the causes of this would be. I have been told that it may be due to over tightening or that it may be related to a...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.