Search the forum,

Discuss Magnetic filter and inhibitor in the Plumbing Jobs | The Job-board area at PlumbersForums.net

bjl

Messages
24
Hi
we have a new boiler fitted 3 yrs ago with a magnetic filer cartridge and inhibitor??. over the last couple of years we had to top it regularly due to a small leak. Hopefully the leak has now been found and the cartridge is overdue changing. Should i drain the system down fully and replace with fresh water or should i keep the old partly treated water in there when i replace. surely the fresh water will have more oxygen in it causing more corrosion??? it does look to be fairly clear when i have drained off a bit
thanks
 
I would add a l of fresh inhb in
 
Hi
we have a new boiler fitted 3 yrs ago with a magnetic filer cartridge and inhibitor??. over the last couple of years we had to top it regularly due to a small leak. Hopefully the leak has now been found and the cartridge is overdue changing. Should i drain the system down fully and replace with fresh water or should i keep the old partly treated water in there when i replace. surely the fresh water will have more oxygen in it causing more corrosion??? it does look to be fairly clear when i have drained off a bit
thanks
They don't change the cartridge just isolate with the valves and empty. If you google the make it will show you how. As ShaunCorbs said I would just add more inhibitor, you can't really have too much.
 
They don't change the cartridge just isolate with the valves and empty. If you google the make it will show you how. As ShaunCorbs said I would just add more inhibitor, you can't really have too much.

Yes im going to change the inhibitor but is it better to drain the old water out and fresh water in or keep the old water in
 

Reply to Magnetic filter and inhibitor in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

K
I need to change my scalemaster magnetic scale inhibitor as it is leaking but I cannot work out how to take it off! I ordered a new one the same so I could see how it's fitted but have received a completely different one!! Help please
Replies
1
Views
474
Just had a new Worcester Bosch Greenstar 30Ri fitted with the magnetic filter. When the system is running the boiler is so quiet but there is a sound of trickling water through the filter, loud enough to hear quite clearly and is pretty annoying. I wouldn't of thought trapped air would sound...
Replies
1
Views
745
  • Question
I have a question that I’m hoping those of you who are experienced central heating engineers may be abler to throw some light on. But first I need to tell you about my system, and the problem I’ve been having. Just over 7years ago I had a new CH system installed in my small semi. I say new – in...
Replies
6
Views
469
I just had a quote for a new boiler install as follows I dont undertand why a 15-60 boiler pump is needed and a 25-100 pump is needed as well I currently have an ideal mexico 2 heat only boiler - It has one DAB pump on the boiler return and a 2 port valve at the flow pipe to allow for heating...
Replies
3
Views
538
We have a Daikin Air Source heat pump feeding our hot water and under-floor 8 port manifold heating system. The Daikin has just had its annual service and the engineer commented that the water looked discoloured and that the inhibitor needed replacing?? Is this an easy procedure? I'm pretty...
Replies
0
Views
332
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock