Search the forum,

Discuss Urgently need a Grundfos Valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
4
hi all, dropped the Grundfos 15-50 bleed valve down the floorboards out of reach. The whole contents of the water tank has emptied. Looked online but can only see options to buy a whole new pump when we only need a replacement valve. Any ideas?? Thanks
 
Do you mean the chrome screw ?
The pump bleed screw. I’m not sure sure (we shouldn’t have messed around with it )

A6752171-7D55-4866-BC6F-137835779FF7.png
 
Try a scrap yard or a large plumbers merchant. Merchants always have faulty stock to return and scrappiest will,have a few too.
Where abouts are you based?
 
Its when you mentioned a bleed valve that threw me.
I will have one and could post you it , but if you remove the screw it shouldnt empty a tank , you may need a new pump anyway
 
Its when you mentioned a bleed valve that threw me.
I will have one and could post you it , but if you remove the screw it shouldnt empty a tank , you may need a new pump anyway
Thank you so much!
My mom watched a YouTube video as we were having hearing upstairs but not down. I Don’t think we turn of everything we needed too, but the whole central heating system needs replacing
 
Thank you so much!
My mom watched a YouTube video as we were having hearing upstairs but not down. I Don’t think we turn of everything we needed too, but the whole central heating system needs replacing

lol , this plumbing and heating lark isnt that easy lol .you should be able to send me a private message on here , dont put your address online , email is fine .
 
Before you fit the replacement bleed screw in the pump spread a towel out under the pump, not to catch water but to catch the screw, in case you drop it.:eek:
 
TBH if you only have heating upstairs sounds like the pump has gone
 

Reply to Urgently need a Grundfos Valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
7
Views
198
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
172
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
167
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
207
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
255
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock