Search the forum,

Discuss Anybody seen or done this before, coz I ain't.... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Jim Goodenough

Esteemed
Plumber
Messages
654
Hello all,

Today I was replacing a CC WC with a concealed cistern and BTW pan (in a cabinet). The CC pan was bedded on mortar, I couldn't understand why as the connector was going into the floor, then low and behold when I chipped the mortar away I came across this...

pan connector (2).jpg


2 x 90 deg pan conn's joined to convert LL drain position to CC.... well I never?

Wonders never cease... :rolleyes:o_O
 
Hello all,

Today I was replacing a CC WC with a concealed cistern and BTW pan (in a cabinet). The CC pan was bedded on mortar, I couldn't understand why as the connector was going into the floor, then low and behold when I chipped the mortar away I came across this...

View attachment 34565

2 x 90 deg pan conn's joined to convert LL drain position to CC.. well I never?

Wonders never cease... :rolleyes:o_O
There is never an easy job is there? What are you going to do now?
 
Well I fitted the cabinet and siliconed a piece of tile over the hole :D, fixed cistern, panels, flush button and BTW pan - all working a treat, see below.

20180919_191848.jpg
 
You mean you just left the waste like that Hmmmm, is the tray fitted surley not them wall's need repairing . Kop
 
Ruthless! I'd be concerned more about that badly discoloured pushfit tee and Flexi combo...did that get replaced?
 
I’m more interested in watching him silicone the outside of the cubicle next to the basin. :D:D

I managed it with one of these https://www.screwfix.com/p/p-c-cox-rotating-nozzles-5-pack/3462x

A number of things occurred to me HF I must say. Hey ho, so long as it's Goodenough . :rolleyes::rolleyes::rolleyes:

Haha, I've had the mick taken for many moons on my surname :D

You mean you just left the waste like that Hmmmm, is the tray fitted surley not them wall's need repairing . Kop

No didn't leave the soil like that, new long 90 deg Multiqwik.

Ruthless! I'd be concerned more about that badly discoloured pushfit tee and Flexi combo...did that get replaced?

Yep all replaced with new, by the way the cistern FV was a pig to connect to, wouldn't take a tap connector of any sort and to 1/2" FI x 15 elbow.

Here's some pics of the "dodgy" pan connector removed and the finished job.

Cheers chaps:)
20180925_125235.jpg
20180927_214847.jpg
20180927_214942.jpg
20180927_214947.jpg
20180927_215006.jpg
20180927_215109.jpg
 
I managed it with one of these https://www.screwfix.com/p/p-c-cox-rotating-nozzles-5-pack/3462x



Haha, I've had the mick taken for many moons on my surname :D



No didn't leave the soil like that, new long 90 deg Multiqwik.



Yep all replaced with new, by the way the cistern FV was a pig to connect to, wouldn't take a tap connector of any sort and to 1/2" FI x 15 elbow.

Here's some pics of the "dodgy" pan connector removed and the finished job.

Cheers chaps:)
View attachment 34791 View attachment 34792 View attachment 34793 View attachment 34794 View attachment 34795 View attachment 34796
Spot on job well done , it a pleasure to look at
 

Reply to Anybody seen or done this before, coz I ain't.... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock