Search the forum,

Discuss Condensate filter on a rather long run in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
43
Hi all
Just to ask. My installer has to run the condensate pipe about 5mtr to a drain. As the boiler is going to be situated in a garage my understanding is that is classed as external if it’s in the garage. I saw somewhere that 3 meters is about max and it's only .5 metes inside the garage the rest is outside (4,5). I’m worried about freezing up in the winter due to the length of the run. As an alternative is it possible to put a condensate filter on the pipe and simply let it exit the garage into the path? It will have a ph of about 8ish so in theory it will be no more acidic than tap water?
Any advice would be welcome.
Thanks
Ps a pump isn’t really an option
 
I'm not actually sure what the regs say about neutralisers but I'd say no simply because it is a temporary solution in that the filter has a finite lifespan and is therefore reliant on you replacing it.
 
It's a non go just discharging it even with a "filter"
 
I'm not actually sure what the regs say about neutralisers but I'd say no simply because it is a temporary solution in that the filter has a finite lifespan and is therefore reliant on you replacing it.
Yeah, my understanding was that as long as it's part of the annual serivce the filter is replaced?
 
If you can find that documented somewhere I'd like to see it and that's if you actually get it serviced yearly which is not actually compulsory, go with the oversized pipe run to be safe.
 
If you can find that documented somewhere I'd like to see it and that's if you actually get it serviced yearly which is not actually compulsory, go with the oversized pipe run to be safe.

This make any sense?

"If neutralisation is required, there are also fully integrated units available for boilers of 10 kW to 1MW. These include neutralising pellets within the tank, which can be changed during annual servicing"


Practise safe condensate handling - Modern Building Services
 
That's if you use a condensate pump...

"In most installations condensate can be removed through the normal gravity drain in conjunction with the boiler manufacturer’s instructions. However, if a boiler has to be installed on internal walls or within basements the use of a boiler condensate tank pump or soak away can be the only solution for the installer."

...which will also include the properly designed and installed outlets. It seems to me these neutralisation devices are to be used in conjunction with proper disposal to prevent condensate entering the system so no you can't use one and having it emptying onto a path for the reasons given above.
 
I heard of an accident a good few years back, where an elderly lady slipped on a frozen puddle of ice on the concrete path, from a condensate pipe. The plumber terminated there and not into a drain or soakaway.
The lady’s face was apparently a mess and broke her arm and hip. Her family were seething and taking the plumber to court.
 

Reply to Condensate filter on a rather long run in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have an Alpha Intec boiler installed on my loft wall. The flue goes horizontally from the top of the boiler and passes through the wall, exiting high up in the gable end. The boiler was installed about 6 years ago. My attached garage joins the gable wall directly below the flue. I had the...
Replies
2
Views
6K
Hi there, thanks for your time to look at this record long post!! I work on the operational management side or a small building contracting firm. This question is for my own house setup. We are really fortunate to have a large house, about 5,000sqft in total over 3 floors. It was built around...
Replies
9
Views
1K
H
Hi there, thanks for your time to look at this record long post!! I work on the operational management side or a small building contracting firm. This question is for my own house setup. We are really fortunate to have a large house, about 5,000sqft in total over 3 floors. It was built around...
Replies
0
Views
626
HRP123
H
My house is a 1970s build fairly well insulted detached 2 storey. Split in 2no zones which are controlled independently with digital thermostats and rarely run at the same time. Downstairs has 9 double rads and 5 single rads. Upstairs has 5 double rads and 1 single rad. Open vent system std...
Replies
104
Views
10K
I have an old Glow Worm Fuelsaver 40B Mk 2 installed on the kitchen wall. In November, the heat exchanger began making a kettling noise. It’s done this before. In the past, simply draining and refilling the system to flush out loose deposits was enough to stop the noise. In November 2021, I...
Replies
3
Views
2K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock