Search the forum,

Discuss Concealed Cistern - help with changing flush valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
42
Hi guys

Firstly...go easy on me! I’m a site basher, I’ve installed loads of Concealed cisterns but never had to fix one! I’m venturing into the world of domestic maintenance and it’s nerve wracking!

So is it really possible to change a flush valve through the hole where the flush plate is?!
I had a look at one today and it needs replacing, Cistern is behind fully tiled boxing.

It doesn’t seem possible I can get it out the hole, but then it must do right? Otherwise what do I do?

Thanks!
 
yes normally do you know the brand?
 
Not too sure. I’ve attached a photo of that helps!

27827844-A5A6-4E07-ABDA-5A06A9696B0F.jpeg
 
Thanks so much!
And I can get that out through the hole? I don’t need access to the rest of the Cistern.

dont have a clue i would try taking the old one out it should fit but cant be 100% as ive never seen that type fully built in
 
Twist it the wrong way and you might break the securing lugs :(
 
Status
Not open for further replies.

Reply to Concealed Cistern - help with changing flush valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock