Search the forum,

Discuss Sealing Back to Wall Pan in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
4
The Boss wants me to seal the sides and top of the pan against the WC cabinet. Obviously I will seal around the base but I think sides and top will look rubbish.
What do others think?
 
White silicon and just fill in any gaps etc
 
What is the largest gap size, see some that are way out from the cabinet panel and they do look carp when silicone is applied.
 
What is the largest gap size, see some that are way out from the cabinet panel and they do look carp when silicone is applied.
Never had one more than 5/8 mm that said. I have been told I have been lucky.
 
My gaps are pretty small but down the sides at least the ceramic curves in towards the WC cabinet so that my Fugi won't help.
However, I'd best give it a go for the sake of domestic harmony!
Thanks for the input.
 
My gaps are pretty small but down the sides at least the ceramic curves in towards the WC cabinet so that my Fugi won't help.
However, I'd best give it a go for the sake of domestic harmony!
Thanks for the input.

Just use the 90 profile to fill in the ceramic curve
 
Silicon spray helps with anything if the tool grips too much
 
Will agree with above 5-8mm line will look need and acts as strengthener.
 
Just spray it wit soapy water then use whatever device u like to remove excess silicone...Lidl do some really good silicone tools...
 
Status
Not open for further replies.

Reply to Sealing Back to Wall Pan in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock