Search the forum,

Discuss Regin REGU35 Premier Gauge in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Bibbs118

Gas Engineer
Messages
141
Morning,

Anyone using a regin u gauge, the top quality one that uses blue liquid?

I'm thinking of getting myself one but they are about 70 quid.

Any thoughts?
Thanks
 
No.
I bought an HSG Guage (single tube type) about 20 years ago that I found out had potentially carcinogenic blue liquid in it.
I have a few others too

But:-
I use one of these for most things
upload_2018-3-28_13-56-7.jpeg

What benefit will the blue one give?
 
It's the answer to more than vision problems is Vimto.
For example, a hot Vimto on a winters day is nice. Or hot c-vit.
Or hot ribena.

When was the last time you had a hot one Harvest?

What about OXO ?
Anyone like an OXO with white pepper in?
 
It's the answer to more than vision problems is Vimto.
For example, a hot Vimto on a winters day is nice. Or hot c-vit.
Or hot ribena.

When was the last time you had a hot one Harvest?

What about OXO ?
Anyone like an OXO with white pepper in?
More of a Bovril man myself. But the wife loves a hot Ribena.
 
Getting back on the blue liquid. I don't know if it is the same stuff but the blue hsg fluid in the gauge I have is very expensive.
The gauge was over ÂŁ80 20 years back and I am sure the fluid was very very expensive too.
It's another reason I don't use it. I was always bothered about damaging it.
 
Cracking gauges mate , love mine , never use anyliser.

As for the liquid .... we tend to compare liquid in gallons i.e . Petrol , diesel , beer , milk etc etc , that blue liquid if my maths is correct works out a out 8/9 k a gallon , wow ! ( my maths aint good I may add )
 
Bottle of the liquid that fills the gauge is around a tenner
So you have the blue gauge!
What possessed you to buy it?
Was it the colour?
The quality?
That it makes you look like a Dr?


Is it High specific gravity (hsg) fluid or just a coloured fluid?

Can it freeze?

Sorry about this, I have spotted them before and like the idea but the price put me off.
 
You get what you pay for, personally my regin has proved faultless & i have only had to refill fluid twice in 5yrs.

Once the meter regulator was knackered & blew it straight out the top before i could switch valve off & second time was when i didn't put the plugging piece back in and it was lying in the gas toolbox on it's side & leaked out.

Still got spare bottle of the fluid which is a specific gravity fluid specially calibrated for the regin manometer.

Would not use anything else,

Cheers,

Andy
 
So you have the blue gauge!
What possessed you to buy it?
Was it the colour?
The quality?
That it makes you look like a Dr?


Is it High specific gravity (hsg) fluid or just a coloured fluid?

Can it freeze?

Sorry about this, I have spotted them before and like the idea but the price put me off.

Defo never frozen , at 8K a gallon for the blue stuff
it better not . Incredibly easy to read , steel construction, streets ahead of the plastic.
If it got nict tomorrow I would go buy another one in a breath.

Who said Yorkshire men are tight
 
Defo never frozen , at 8K a gallon for the blue stuff
it better not . Incredibly easy to read , steel construction, streets ahead of the plastic.
If it got nict tomorrow I would go buy another one in a breath.

Who said Yorkshire men are tight
Crikey maud, it must be good.

I heard that’s how copper wire was invented.
Two Yorkshire men fighting over a penny.
 
I had the region one and loved it. Got it for free from merchants when I'd put a big order in. Fluid was about 12 quid but only had to replace twice in 8/9 years. I list mind just before Xmas and am back to a monument ÂŁ15 one, it breaks my heart every time I have to a tightness test:(:(:(
 
Get it I have itand the fluid never gets cloudy and never loses fluid. Pay what you get! Plus it looks good
 
Status
Not open for further replies.

Reply to Regin REGU35 Premier Gauge in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
207
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
81
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
129
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
177
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
190
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock