Search the forum,

Discuss Can I flush toilet / run water etc during power cut? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
15
Hello,

We are in the middle of a power cut at the minute and I'm wondering if running water to make tea, or even flushing the toilet, will put any extra strain on my Ecotec Pro 28 combi boiler?

Many thanks.
 
Yes you can it just will not get hot and yes you can flush the toilet. Use your gas cooker to heat water.
 
Status
Not open for further replies.

Reply to Can I flush toilet / run water etc during power cut? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys, first post here So I have been boxing in a number of heating pipes that are throughout my garage since the boiler was located there by the previous owner, they decided to run pipes all along the edge of the garage floor... I do however have one that goes vertically out of the concrete...
Replies
1
Views
192
Hi there, The issue that I am having is I am building a new house and the plumbers are absolutely hopeless. Being an industrial plumber and spending 8 months on new houses during my apprenticeship. I have a more brighter idea than these fella's. From issues during rough-in-stage pipe being...
Replies
1
Views
813
This issue arose about a year ago. Does anyone have an idea why I occasionally hear (about once every hour or longer) a hammer related noise coming from my copper water pipes when no water is being used? It basically sounds like the noise you hear after the water shuts off when your toilet bowl...
Replies
0
Views
347
B
Hello, I've had unfortunate issues throughout my adult life and more so since switching to a largely plant based diet of blocking toilets. Across multiple houses I've run into issues with it so I don't think it's one toilet specific, it's just me. I seem to produce a lot of poo! While it...
Replies
7
Views
1K
Hi All This is following on from thread I made a few days ago but can't seem to find I'm in a bit of a bind with my CH design where I want to sort all of my rads and do some other bits including fitting a filter but I'm stumped on how to drain down due to how the system is put together...
Replies
0
Views
399
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock