Search the forum,

Discuss Boiler not firing and making bad noise (video) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Sounds like a circulation issue mate, or a blockage. What make and model of boiler is it. (Pic would be good) you may have an external pump in the Airing Cupboard. If so and you are confident enough make sure that the pump is spinning. If not then their is your issue. Also have you vented your radiators?
 
Sounds like a circulation issue mate, or a blockage. What make and model of boiler is it. (Pic would be good) you may have an external pump in the Airing Cupboard. If so and you are confident enough make sure that the pump is spinning. If not then their is your issue. Also have you vented your radiators?

Hi Harvest Fields,

It’s a ‘GlowWorm Fuelsaver F’ - picture attached.

There is no pump in the airing cupboard.

What do you mean by vented the radiators?

Is it something that should have been picked up on the gas safe test/certification? It passed last week.

Thanks! Phil

2058211B-55D3-4771-A462-CD3A50742563.jpeg


7DEBB3DD-54DC-4CF8-9B69-7316A127AC9F.jpeg


C08F50CD-0797-4C49-ADDA-1A9F0363413B.jpeg
 
Can I have a pic of the airing cupboard please. When I say vent I mean bleed each radiator incase they have air in.
 
Is it something that should have been picked up on the gas safe test/certification? It passed last week.

Not if it's just started this morning!
 
Can I have a pic of the airing cupboard please. When I say vent I mean bleed each radiator incase they have air in.

Hi Harvest Field,

Yes the radiators are bled frequently, last week in fact, I’ve uploaded pictures of the pump on the airing cupboard, sorry I didn’t think there was one initially.

Thanks, Phil

9F096B0B-FEB9-487E-AF7B-B3FD24A80EAA.jpeg


52604F92-ED00-44F5-8AB2-D0843AE677E2.jpeg
 
Agree with above mate. If you are renting get a GSR out to repair. The pump may be knackered and needs checking.
 
If you bled the system last week I would pop your head up in the loft and look in the small water cistern (tank). Check there is water in it. Sometimes the ball valve can get siezed shut and when you bleed the system the tank (and in turn radiators/system) eont have water in it. If this is the case call your landlord but in the meantime take a jug or bucket and put water from the big tank to the small one yo refill the heating system.

Saying all that, it's more likely to be a knackered pump but just worth checking.
 
Is it just me but isn't there a bit of staining above the top lhs corner of the square around the burner view window. If so the boiler is not in great health & needs changing?
 
Status
Not open for further replies.

Reply to Boiler not firing and making bad noise (video) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Hello, I have just moved in to a new flat this week and have a problem with noise coming from somewhere around the top of the boiler. It's a loud clicking/knocking sound that lasts about a minute, stops for 20-30 seconds and starts again. It seems to happen at night, starting in the evening...
Replies
1
Views
320
I got a problem with my boiler,it's got some vibration when it starts to work,it doesn't fire up unless I duck tap and blank half of the air intake,I checked if its enough voltage to the gas valve its 22v dc going from pcb to it exactly what it says on the gas valve,checked fan seams to work k I...
Replies
3
Views
480
Our boiler has started making a noise on start up and when it kicks in and out engineer says it’s an ignition coil bracket and nothing to worry about but it sometimes gets worse and it went on for few seconds todays (5) like it was stuck and then freed itself and might have been coincidence but...
Replies
0
Views
293
Hi there, My boiler (Worcester Greenstar Ri) has started making a soft knocking noise when it turns on, and again a few times when it turns off. I've attached a short video of the sound. It isn't constant, it seems to happen within the first 10 mins of the boiler starting up, then you won't...
Replies
3
Views
276
Hi everyone, I'm hoping to get some advice on an issue I'm having with my Vaillant Ecotec Pro 24 boiler (R1 PCB). It was installed in 2013 and has worked perfectly up until this week. When the boiler does start, it runs for a few seconds, makes some noises, and then shuts down again. I've...
Replies
0
Views
149
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock