Search the forum,

Discuss Boiler temperature dropping them cutting off in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
15
I have a BIASI M90E32S which had a faulty expansion vessel. Pressure kept dropping so we added a new external vessel. But now the heating comes on for an hour or so. At a certain temperature the boiler cuts off. After a restart it works for an hour again. Please help. Could it be a faulty pump or something else? Did the existing vessel need to be isolated? Because it isn't right now.
 
I have a BIASI M90E32S which had a faulty expansion vessel. Pressure kept dropping so we added a new external vessel. But now the heating comes on for an hour or so. At a certain temperature the boiler cuts off. After a restart it works for an hour again. Please help. Could it be a faulty pump or something else? Did the existing vessel need to be isolated? Because it isn't right now.

Why was the pressure dropping?
When you say it cuts off, do you mean it needs resetting?

It sounds like you need a Heating Engineer.
 
Status
Not open for further replies.

Reply to Boiler temperature dropping them cutting off in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock