Search the forum,

Discuss Which core drill set? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Jennie

Gas Engineer
Messages
283
Hi all,

I need to buy a core drill set (4inch, inch1/2, inch1/4) to use with my SDS drill.

What sets would you recommend? I'm after something reasonably good - probably diamond tipped. But reasonably priced.

Thanks everyone,

Jennie
 
Hi all,

I need to buy a core drill set (4inch, inch1/2, inch1/4) to use with my SDS drill.

What sets would you recommend? I'm after something reasonably good - probably diamond tipped. But reasonably priced.

Thanks everyone,

Jennie
Hi Jennie,

I hope you will have as well some sort of clutch on your sds otherwise it will rip your arm off.
 
I've always used my colleagues drill bits in the past. But now the time has come to get my own.
I do not know what's the price range but I can recommend spectrum mbx5 diamond core drill set. It ain't cheap but i think good tools shouldn't. I think could get also some cheaper sets but do not know what's the quality like.
The Erbauer set is ok for the price but again it depends on how often you use the core drill set. If it's 3/4 times a year then it will be ok to go cheaper.
 
Rothenburger do a set for about £100 Plumbase usely have them in, depends how much drilling you intend doing had mine a couple of years & been OK.
 
Rothenburger do a set for about £100 Plumbase usely have them in, depends how much drilling you intend doing had mine a couple of years & been OK.
Don't waste Yer money on the rothenberger set, it will last less than 6 months of light use and look like a toothless hag! Better off buying a cheap set fer fifty quid off the pikey vans that go round the site and believe it or not, for a change the pikeys won't be robbing Yer!!!!!!!
 
Status
Not open for further replies.

Reply to Which core drill set? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
397
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
4
Views
183
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
202
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
250
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
147
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock