Search the forum,

Gas safe courses

Discuss Gas safe courses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jamel

Hello everybody I am new to this site. I was wondering if anybody could give me some advise on where the best place to go is for a gas safe qualification. At the moment I am a fully qualified plumbe
r.
 
Welcome along Jamel, I`m not gas but where about`s roughly are you.
 
Lots of similar threads if you use the search.The general advice seems to be that many expensive courses do not give you the qualifications required.The problem is in getting the practical experience for the NVQ portfolio.If you are actually working as a plumber you may come across someone Gas Safe who would help.Check with your local college they should be able to advise you about course requirements.
 
Depending on your age, i would advise Croydon college. They use to have an apprenticeship scheme where you would be in college studying one day a week and be working with a gas engineer for three or four days.
 
rpm said:
Welcome along Jamel, I`m not gas but where about`s roughly are you.
Click to expand...

Farrukh Ahmad said:
Depending on your age, i would advise Croydon college. They use to have an apprenticeship scheme where you would be in college studying one day a week and be working with a gas engineer for three or four days.
Click to expand...

Think post #2 come first mate.
 
hello and welcome,

I wouldnt do a short course if your looking to get employed most places want experience and shy away from short course application
 
Status
Not open for further replies.

Reply to Gas safe courses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
111
Stigster
Stigster
C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
192
cheddarman
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
2
Views
148
johndave
johndave
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
199
Dave Moore
D
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
203
Firefox
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock