Search the forum,

Discuss Gonna be a busy day Monday in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

markfxy

Plumbers Arms member
Plumber
Messages
989
Got this little lot to install monday 300 sq metres downstairs, upstairs is going to be a nightmare builder won't batten the joists wants them all notched :mad2: quite a few are at 200 centres I've told him to do one.Builders you gotta love them:yes:
ufh 300.jpg
 
Last edited:
you going to put a lever valve before the port valves, so to help with servicing afterwards?
 
yes I'm going to take out those crappy compression fittings on the bottom of the two ports an replace with compression copper to irons then a lever valve, I dont know why they use them the olive sits flush with the end of the pipe and the dam things are a nightmare to seal!
 
Status
Not open for further replies.

Reply to Gonna be a busy day Monday in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
196
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
249
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock