Search the forum,

Discuss Blow Torch, which one? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

nysk2008

Hi all,

Looking at buying the Rothenberger Superfire 2 but have read quite a few mixed reviews.

Can anyone let me know what is a decent torch to buy and whether propane or MAPP is best?

Cheers
 
Hi all,

Looking at buying the Rothenberger Superfire 2 but have read quite a few mixed reviews.

Can anyone let me know what is a decent torch to buy and whether propane or MAPP is best?

Cheers
superfire 2is good just keep it clean and dont drop it mapp burns hotter than propane but is more exspensive
 
got a few.
rottenburger 2 = northsea oil rig piper alpha blow off.
quick fire 2 = b&q ÂŁ25 ish, and i prefer this one for general work with propane/mapp for outside work.
 
If you're a plumber and working with builders and other trades, they'll give you more respect if you have a Rothenberger rather than a cheapie shed model.

Same applies to others tools - would you trust a carpenter who turned up with a Draper 12 volt drill?
 
I've had various torches. I prefer the Superfire 2 to all the others. Can't say I've really had a problem with it, other than having to tighten up the allen key screws regularly, but that's probably due to the abuse it gets in the back of the van.
 
If you're a plumber and working with builders and other trades, they'll give you more respect if you have a Rothenberger rather than a cheapie shed model.

Same applies to others tools - would you trust a carpenter who turned up with a Draper 12 volt drill?


Shouldn't make any differance what name is on your tools, I know a chippy who gets everything from the sheds, got a b&q drill, focus jigsaw...top notch chippy, I also know a chippy who has everything dewalt, dumb twonk can't even hang a door! A tool is as good as the bloke on the end, you get respect by being good at what you do.


As for the blowlamp, I have just got the rothenberger to replace my bullfinch, still like the bullfinsh but the roth is a better tool for the job. Was soldering today on some 28mm outside with the roth on mapp gas, not a problem even in the wind but I wouldn,t have done it with the bullfinch.
 
these are the torches i use,
the roth cost me ÂŁ60 and i hardly use it because of the big flame/tight corners etc.
the bernzomatic quickfire is my fav to use.
and the simplest @ ÂŁ17 is the standard that all the old boys use that i see anyhow.
 

Attachments

  • roth.jpg
    roth.jpg
    12.6 KB · Views: 76
  • TS3000T_Lg.jpg
    TS3000T_Lg.jpg
    51.4 KB · Views: 100
  • prm9gskit.jpg
    prm9gskit.jpg
    19 KB · Views: 104
If you're a plumber and working with builders and other trades, they'll give you more respect if you have a Rothenberger rather than a cheapie shed model.

Same applies to others tools - would you trust a carpenter who turned up with a Draper 12 volt drill?

It sounds like the clothing mentality is coming to our tools,we will all be expected to have designer tools soon to get trade cred,with our ÂŁ 80 little niki pipe slice , ÂŁ 120 ralf lauren pipe grips and ÂŁ2000 celvin klein flushing unit

I have a Rothenberger superfire 2 because it is a very good touch but if next time I need one and they do a cheaper make somewere,thats just as good ,that will do me
Most of my tools are standard stuff,mainly because alot goes walkies or is stolen,I bought a cheap drill for my 4" core bit about three years ago for ÂŁ45,still going stronge,no trade cred when I pull it out though :(
 
Last edited by a moderator:
I must admit I have been surprised by how much comment by people I've worked with at jobs, on some of my tools which is why I mentioned what I did further up.

Wish I hadn't mentioned it on this forum now!!!

I felt when I started plumbing that as long as I had good enough tools (irrespective of price), they'd do for me, but I've been embarrassed on occasion with what others have said about my stuff. Perhaps it's more to do with me cleaning my tools and toolboxes every so often? I do that because a) I like to look after my stuff and b) if I turn up to a customer's house I feel much more comfortable about plonking stuff on their floor if my kit is clean. I feel it gives the impression that if I look after my stuff, they'll feel I'll look after their house and possessions.

For the record, I have a Rothenberger Superfire 2, an 18v DeWalt drill, a couple of expensive wrenches/adjustable spanners and much of the rest is cheap but perfectly functional (eg a screwdriver set with loads of attachments that cost me ÂŁ10, a jigsaw that cost me about ÂŁ15, etc.)
 
I use the rothenburger 2, the torch heads last me about 2 years. I do buy decent gear after research. For instance, will only use bacho adjustables, keep them clean and keep my eye on them, check my tool bag every time I leave a job. Hate cheap power tools, watch builder buy cheap drivers for a job, they fail, they buy a new one, charge goes to customer, no real torque control, srcew heads ripped off, pozi heads damage, whats the point. Buy trusted tools and look after them, they'll make your life easier.
By the way do any of you have tools but dont use them, my wife bought me a set of multi steps, they're good, but I leave them at home and still use my normal steps on the van. I think about this yet still carry on.
 
I use the rothenburger 2, the torch heads last me about 2 years. I do buy decent gear after research. For instance, will only use bacho adjustables, keep them clean and keep my eye on them, check my tool bag every time I leave a job. Hate cheap power tools, watch builder buy cheap drivers for a job, they fail, they buy a new one, charge goes to customer, no real torque control, srcew heads ripped off, pozi heads damage, whats the point. Buy trusted tools and look after them, they'll make your life easier.
By the way do any of you have tools but dont use them, my wife bought me a set of multi steps, they're good, but I leave them at home and still use my normal steps on the van. I think about this yet still carry on.

I couldn't agree more, we are professional trades men and so should be using professional tools not DIY tools you can buy from B & Q, treat your tools with respect, keep then cleaned and they will look after you. You get what you pay for so the extra money is in fact an investment, in my opinion.

Image and first impression is everything in our industry, if you make a good impression on the customer you will get further business...of course you have to do a good job too.

little things like being polite, not swearing, wiping your shoes as you come in, lay dust sheets, present your tools nicely...etc etc does not go unnoticed.

back on topic, Go for the Roth Superfire 2, you wont regret it.

Alex
 
Just bought the superfire 2, for ÂŁ91 with 2 bottles of propane and 2 bottles of mapp. Never used mapp before what is the diffrence between the two gasses apart from it being a higher heat? would you use it for larger diameter pipes?
 
Shame you probably coulda got all that for ÂŁ75 if u looked round a little....


the difference is the higher heat, and yes wider pipes and also i find outdoors if its been cold its just a tad quicker.

for an extra couple of quid id get the mapp each time

Alex
 
I use a Bernzomatic TS7000, apparently identical to a Rothy superfire, just a different badge.

I agree though cheap tools are usually false economy, but in saying that I have bought some cheapo stuff which has got me out a tight spot!!
 
Cheers Alex kinda thought as much. Damb will have to start looking around before buying d'oh
 
Like said

I use rothenburger sf2 for bigger pipe and bernzo for 15 and 22.
 
Anyone got the Bullfinch Firepower torch? Looking at getting a new torch soon.
 
no but my dad [aplumber for 40 years] reckons bullfinch are a top make or allways used to be me i have a rothenburger but its dieing

Just bought the superfire 2, for ÂŁ91 with 2 bottles of propane and 2 bottles of mapp. Never used mapp before what is the diffrence between the two gasses apart from it being a higher heat? would you use it for larger diameter pipes?

from plumbfix?
 
Last edited by a moderator:
I've made my mind up - I'm going to get the Bullfinch soon as my Benzomatic is rather worse for wear now.
 
Well,at the moment, I'm a world away from you guys working in the industry.
I'm only 5 months into my 2 year 6129 course but when I asked my tutor which blow torch to buy he said without hesitation a Rothenberger Superfire2.Thats good enough for me ÂŁ52 from CityPlumbing.:)
 
i mate i have had my roth sf2 for about 2 months now and its starting to play up am thinking of trying the brand new bernzomatic ts7000 does any one know if it is any good?
 

Attachments

  • ts7000.jpg
    ts7000.jpg
    1,018 bytes · Views: 136
i mate i have had my roth sf2 for about 2 months now and its starting to play up am thinking of trying the brand new bernzomatic ts7000 does any one know if it is any good?
yes m8 it will be as good as your old one:rolleyes:
 
Mate has just bought the new Bullfinch Firepower torch. Knocks spots off the Benzomatic. Makes for very speedy working when soldering up 28mm fittings today. Will definitely be getting one.

It's all British too!
 
Last edited:
a certain mail order firm sell the primatic ones which are fantasticly simple and last for years. the rothenburger is a little pricey & delicate but is the mutts nutts but make sure its the one with the flame adjusting screw on the back
 
Hi guys. I'm about to start my apprenticeship and looking at the Rothenberger super fire 2 and Nerrad firejet! Hat peoples personal opinion and preference on them?
 
Hi guys. I'm about to start my apprenticeship and looking at the Rothenberger super fire 2 and Nerrad firejet! Hat peoples personal opinion and preference on them?

got nerrad cutters but SF2 would be my choice,i kill one in about a year
 
Nerrad has cool touch nozzle! Look it up on YouTube
 
I use the Rothenberger trigger torch with Propane mainly. Nice not to have a bottle of gas in your hand as it gives you more control and it can fit in tight spaces. Not cheap though! As a general rule I think that Mapp gas burns too hot for small pipework like 15 and 22mm. Can get the flux too hot resulting in a poor joint. Just my opinion!
 
Turbotorch TX504 is my weapon of choice. Find it much better than the SF. Never tried Nerrad's.

I'm tempted by turbotorch tx504 I've been tolled that you get a much more contained flame making soldering in awkward areas better , have you any thoughts on this as a owner ? I've got the Rothy
 
So got the rothenberger for Christmas thanks guys for the in put but I'll take all this in to count text time IMG_0044.jpg
 
Status
Not open for further replies.

Reply to Blow Torch, which one? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock