Search the forum,

Combi cylinder 450 x1400 economy 7

Discuss Combi cylinder 450 x1400 economy 7 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Tonycane

Never fitted and need it out of the shed.
£200 collected from wv11
 

Attachments

  • image.jpg
    image.jpg
    78.1 KB · Views: 25
Status
Not open for further replies.

Reply to Combi cylinder 450 x1400 economy 7 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Shower Pump on air to water Unvented Cylinder?
Hi, I'm in my new build 2 years and the shower pump has died. I have an air to water unit downstairs is in the utility which I've been told is unvented and pressurised. The cold water feed into this cylinder is from the attic tank, not the mains as I turned off the mains stopcock to see if hot...
Replies
6
Views
160
thegrizzlyone
T
C
Britony combi se 40 60 80 fault
Hi all I have a britony combi se 80 with fault 40 60 80 had british gas out to repair under homecare cover but they can't seem to repair it. They have been out 7 times so far and fitted a new pump heat exchanger air pressure switch and a pcb. Does anyone on here know what else could be the...
Replies
0
Views
261
chris3216
C
Zach054
Cylinder problem
Hi There was no shut off valve on the tank feed to the hot water cylinder, and I needed to move a couple of hot water pipes, so I shut off the mains water, turned boiler off (Remeha avanta) and opened the hot kitchen tap to drain the cylinder. After doing the work etc, Everything up and...
Replies
4
Views
212
ShaunCorbs
ShaunCorbs
D
  • Locked
install combi boiler and pressurised hot water cylinder
Hello, looking for a heating engineer to recommend / install a pressurised cylinder and combi boiler system. There is ufh for a living space and two bathrooms, and radiators for the rest of the house. It's a 3 bed 2 bathroom property with solar panels on the roof, located in ringwood bh24. Any...
Replies
0
Views
559
David Lowth
D
T
h/w cylinder compatible with future heat pump system?
Hi We urgently need to get our h/w cylinder replaced because it's leaking. Our current system is oil boiler feeding underfloor downstairs, radiators upstairs and an unvented hot water cylinder for hot water. We are thinking of moving to a heat pump at some point but aren't ready to do this. My...
Replies
2
Views
354
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock