Search the forum,

Discuss which fitting? radiator 15mm pipe to central heating valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
4
HI!
i am a new member and only a DIY'er
i have had to replace a radiator with a smaller one
i need to extend the outlet of the radiator by 6" using
15mm copper pipe...what fitting do i use to connect
the pipe to the system valve (which has the original radiator fitting connected )
regards
 
any pics of the valve you need to go onto
 
upload a file right of post reply
 
yes but how do i upload it

pic3.jpg
 
best way would be drain down and either adjust the pipework or install a new valve

eg

https://www.screwfix.com/p/drayton-07-05-900sx-white-chrome-angled-lockshield/7877g

https://www.screwfix.com/p/compression-adapting-male-coupler-15mm-x/67110#_=p

and use a piece of 15mm chrome pipe between the rad and valve

if you dont want to drain down

https://www.screwfix.com/p/compression-adapting-male-coupler-15mm-x/67110#_=p

https://www.screwfix.com/p/compression-adapting-female-coupler-15mm-x/76567

and a piece of 15mm chrome
 
upload a file right of post reply
thanks very much will check it out♪♪
 

Reply to which fitting? radiator 15mm pipe to central heating valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock