Search the forum,

Help with CCN1 qualification

Discuss Help with CCN1 qualification in the Plumbing Jobs | The Job-board area at PlumbersForums.net

J

James Libby

Messages
6
Hi everyone, I'm taking my CCN1 tomorrow and would like some advice on things that I possibly could slip up on.
I've studied as best I could but worry that something could come up that I've overlooked. Any things to look out for?
 
Hello and welcome
 
Is it actually the exam or are you doing some training first?

My advice is read the question twice before answering some of them are written funny.

Everything is in the books and nothing is there to catch you out.

Practical just be slow and steady if you start struggling take a step back for a minute. Get the manufacturer's instructions out and have a quick read.
 
Millsy 82 said:
Is it actually the exam or are you doing some training first?

My advice is read the question twice before answering some of them are written funny.

Everything is in the books and nothing is there to catch you out.

Practical just be slow and steady if you start struggling take a step back for a minute. Get the manufacturer's instructions out and have a quick read.
Click to expand...
Thanks, for your advice. I will take this on board
 

Reply to Help with CCN1 qualification in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
213
John.g
J
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
89
fowlerboi
F
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
175
SimonG
SimonG
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
212
oz-plumber
O
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
212
DIwhYdidIstartThis
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock