Search the forum,

Discuss Which adhesive and/or sealant would you say is the best? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
97
The question is in the title.
 
for what threads?

loctite 577 or 55
 
781 dow corning as a silicone adhesive
Everbuild forever white as a final seal ( shower trays etc )
Best adhesive out , sticks like **** . Incredible stuff .
 
781 dow corning as a silicone adhesive
Everbuild forever white as a final seal ( shower trays etc )
Best adhesive out , sticks like **** . Incredible stuff .

Been impressed with Everbuild Forever White. Recently went back to a bathroom I worked on 5 -6 years ago and its still perfectly white and they're hardly the most on top of keeping things spotless which I know plays a big part in keeping silicone discoloration free.
 
Been impressed with Everbuild Forever White. Recently went back to a bathroom I worked on 5 -6 years ago and its still perfectly white and they're hardly the most on top of keeping things spotless which I know plays a big part in keeping silicone discoloration free.

It is good stuff , think I have been using it over 10 years now, never seen any mould yet , but it does yellow. Big plus point is you can remove it with out too much trouble .
 
It is good stuff , think I have been using it over 10 years now, never seen any mould yet , but it does yellow. Big plus point is you can remove it with out too much trouble .
Ct1 all day long , I have used the forever white and found it to be weak and I have also seen it turn mouldy
 
First time I have heard that , how long did it last ?
I think it was just over a year , it was a shower room I had fitted and I had was back servicing the boiler and ended up removing the silicone round the shower base and doing it again with ct1 for free
 
I think it was just over a year , it was a shower room I had fitted and I had was back servicing the boiler and ended up removing the silicone round the shower base and doing it again with ct1 for free

Unbelievable that lol , never happened to me , did you spray water on it or lick your finger ?
 
Dow Corning 785 used it for years white and clear , I also like ct1 but the white does go yellow over time which is a shame and you need their aerosol spray to tool it up properly. Kop
 

Reply to Which adhesive and/or sealant would you say is the best? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock