Search the forum,

Discuss Legal requirements for plumbing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
97
What are the legal requirements, if any, for carrying out self-employed general plumbing on people's property's in the U.K?
 
With the exception of gas work and work on unvented cylinders, there are NO legal requirement for specific qualifications / accreditation in the UK (unless Scotland is different, don't know).

Some manufacturer's specify that their warranties may be invalid if the device is not installed by someone competent to do so, but that is not a criminal law issue.
 
Thanks for your input

To (try to) answer your question...

One does not have to be licensed so there is nothing stopping ANYONE from setting up as a plumber not matter how appalling their competence. However. There are lots of rules, and training required, to comply with Water Regs, working with things like unvented cylinders and generally complying with building regs.

To be perfectly honest, by far and away the best route in this game, to guarantee both competence and sustainability, is to get work experience and on the job training with an organisation who does a good job and has a good reputation.

IMHO, a so called wet plumber has as much knowledge as a good gas engineer overall. However, the good wet plumbers knowledge is spread widely and a good gas person's is more narrow but much higher (more indepth).

Any fool can set up, and many do. What makes the crucial difference is taking a genuine & responsible attitude from day one. Doing that guarantees your long term success IMHO. ;)
 

Reply to Legal requirements for plumbing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
353
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
213
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
199
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
223
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
9
Views
280
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock