Search the forum,

Discuss Invented cylinder advise in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
86
Hello
Can anyone advise on what non carded plumbers can work on with regards to unvented systems please ?
Thanks
 
G3 registered
 
Just had a look around and unfortunately there is a lot of info stating under 15l is ok for non g3 (and some of it is quite recent)
Lucky I got my g3 ticket...
 
Just had a look around and unfortunately there is a lot of info stating under 15l is ok for non g3 (and some of it is quite recent)
Lucky I got my g3 ticket...

Need g3 updated the regs in 2010 ish g3 covers all hot water systems now only difference is you don’t need to have under 15 l signed off by building control or gas safe eg registered
 
Was discussing this with a colleague yesterday and looking at NVQ L3 textbook (C&G 6189) "Unvented undersink heaters...Because they are less than 15 litres of storage, they are not subject to the stringent regulations that surround the installation of larger... " - published in 2017. Pretty misleading! smh
 

Reply to Invented cylinder advise in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
169
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
239
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
256
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
173
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
154
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock