Search the forum,

Discuss mains water in - what is this fitting ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
2
Hi
was clearing under my house, noticed the mains water in has a leak from some strange blue fitting. No markings on it.

What is it?
Do I need it?
Where can I get a replacement if I do

Thanks
Harry

mains_fitting.jpg
 
Right on Craig, the l/h pipe is odd and the od on the pipes to,the right are suspect, looks like pipework a bit like in place we had in Var , south France years ago before I pulled it all out , but hey ...Rob Foster aka centralheatking
 
Hi all I'm in the dry cleaning trade I've seen something very similar to that on the main water supply to our machines it's an old style scale filter I'm going back to early 80s here you undo the outer ring take out the centre cartridge and replace with fresh one when they clog up maybe wrong but looked exactly like that
 
Just to add if it's as old as I think it is it will restrict flow that's how I came by them was called out to overheating problem on machine was due to lack of water worked my way back and found it there just took it out and replaced with copper pipe
 

Reply to mains water in - what is this fitting ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I am probably being unduly paranoid here but I noticed under our kitchen sink that there is some corrosion evident on a small section of copper pipe between compression fittings on the hot water feed. There are take offs for an outside hot and cold tap together with isolation valves and...
Replies
9
Views
240
I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied from cold water tanks in the loft. It is a vented system. However, in a basement flat and a ground floor flat cold water supply to bathrooms is...
Replies
4
Views
573
I have seen people speaking of this and others not understanding. I have a leak in my pipe coming from the main. Attaching a new 1/2" coupling to the 1/2" pipe (blue pipe) is a problem as the coupling is larger than the pipe although both are 1/2". Most people do not realize that there are...
Replies
1
Views
261
Hi, I have a PRV located in a heated plant room that is between a pair of stop cocks. It was installed to keep pressure under 3 Bar a couple of years ago but I have noticed an area of verdigris on the piece from the main body to the gauge. I wondered if this might be sign of a leak / trouble or...
Replies
9
Views
459
hi all, i need help to fix the leak from a pipe connected to the water pump via flexi pipe and it is feed from the immersion heater. I have emptied the water tank in the loft and also closed the main stopcock. still the leak is on - hoping it will eventually stop. I have not idea how the...
Replies
0
Views
385
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock