Search the forum,

Discuss Gas Restrictor Elbow help! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

D

Dan Newsham

.
 
Last edited by a moderator:
Needless to say I will not be touching anything gas related myself in future!

Pulling gas fires around may damage the flue arrangements, which is dangerous for your and your family. Carbon monoxide has no smell and is a killer. Messing with gas restrictors and seals is also dangerous. Even its not leaking now if the seal wasn't remade correctly it could start doing so in the future.

Get a Gas Safe engineer to service the fire and check all is well. Tell them what you did and why so they can make sure you haven't damaged anything. If you want to clean behind the fire and there is no other way (like a long radiator brush) get the GSR to help with disconnecting and reconnecting.
 
Pulling gas fires around may damage the flue arrangements, which is dangerous for your and your family. Carbon monoxide has no smell and is a killer. Messing with gas restrictors and seals is also dangerous. Even its not leaking now if the seal wasn't remade correctly it could start doing so in the future.

Get a Gas Safe engineer to service the fire and check all is well. Tell them what you did and why so they can make sure you haven't damaged anything. If you want to clean behind the fire and there is no other way (like a long radiator brush) get the GSR to help with disconnecting and reconnecting.


Thanks for the advice. I'll call my plumber tomorrow and ask him to take a look at it for me.

Thanks again.
 

Reply to Gas Restrictor Elbow help! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
203
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
199
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
5
Views
206
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
144
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
235
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock