Search the forum,

Discuss UKPF Father Christmas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Rob Foster

Esteemed
Messages
2,083
I seem to remember being UKPF Father Christmas once, and could be available again this year if anybody else wants to play along. The last time somebody got Suzanne Reid for Xmas but she is booked up already she says when I had a pint with her in the scotch Piper at Lydiate last Saturday. Rob Foster aka centralheatking
 
Shall we all suggest who we would like to spend Xmas with and I will attempt to get the winner a Xmas message on here from who ever is chosen
Yes /no , lady type plumbers can of course join in
Rob Foster aka centralheatking
If all else Fails I will send BIg Rita round for the males on Xmas eve. Big bad Clive for the ladies
UKPF father Xmas decision is final no wingeing. All entries by 15 Dec to give me time to get the chosen message organised, no dead people.
Rob Foster
 
Last edited:
I'm in. Though you'd need to explain the process again and I need to think of alternatives to Marc Brunel and Nye Bevan as both of them are dead. Bet they'd be interesting though!
 

Reply to UKPF Father Christmas in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
300
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
1
Views
74
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
89
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
212
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
223
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock