Ive looked at the tech specs and it seems that the REMS has a lower flow rate but higher pressure at 5.5 bar. the Kamco has a higher flow rate so i understand that will be best for flushing a dirty system, however its maximum pressure of flow is under 2 bar. I wish to use a mashine for...
Hi, got a porcalenosa mixer shower that i need to replace the valve on it. Not sure what tool is used on it as it looks unusual. please see photos with details
many thanks
Has anyone bought one yet? Going to buy one? Or even leasing one with a view to buy.
Probably crazy to buy one now as the price is only going to come down I guess.
Thoughts?
Cheers
hello all
I am looking at getting my kit started as my boss has given me loax Ash and I have some. Does anyone have any tips on wefd to head to looking at all hand tools and power tools so was hoping to get a good deal thanks
I bought these (not the ones in the image, what they sent) Ratchet Tool for 0.5mm²-10mm² Ferrules - https://www.tlc-direct.co.uk/Products/DVDCER510.html, however I had to return them as the crimps kept getting stuck, nearly broke the wire getting it out. I was considering these Ferrule Kit -...
Hi All
I'm after an inspection camera, there has been times when I've needed to look down a drain, or check a leak under a shower, or look under a floor for a pipe run, seen chap ones which attach to your phone, but I suspect these might be rubbish, endoscopes are not long enough.
There is...
I bought a Hozelock tap to hose fitting, though it doesn't fit the tap.
The diameter appears to be 22mm.
I desperately need a fitting for a hose to water some plants, as running back and forth with a watering can seems so unnecessary.
Can anyone point me to what I'm looking for...
Never seen that type of ratchet wrench before...
https://www.youtube.com/shorts/G9BhDrQPKAU
Could be useful, Amazon sell singles of large sizes...
https://www.maxrpm.de/BGS-Line-Ratchet-Wrench-Set-6-pcs-BGS-8665?curr=GBP&opi=95576897
Dear all just bought this and tried to install yesterday.
Item is rubbish. Washer missing from bt which is needed to stop bolt turning. Other 3zwasher badly made and don't got bolt heads.
Spent ages making own new washer and hammering bits to fit washers.
In hindsight should have returned...
Hi guys just wondering is there a drill pump or something that I can attach to pressure test when I'm on new builds. Currently using the rothenberger pressure test pump but that can take a while to get up to pressure pumping by hand. Thanks guys.
Hi guys had to open a new account not sure what happened to my old one.. Is there a drill pump out there that can pump up my 1st fixes for pressure tests? As doing it by hand can take a long time. Thanks.
I bought a torch a few years ago that uses EN417 butane/propane cylinders.
As someone who only uses a torch now and again, the torch has been fine on smaller copper pipe but struggles on 22mm, especially in the cold.
I have seen an adaptor by Monument (437a) which I think should allow me to...
I've been trying to get hold of one of these for the last week or so for a customer. Almost every supplier that sells them don't have any at the moment. So far I've only come across two that did. One refunded after two days without any explanation. The other I placed an order with I've not had...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.