Hi, got a porcalenosa mixer shower that i need to replace the valve on it. Not sure what tool is used on it as it looks unusual. please see photos with details
many thanks
Hi, I'm in the process of buying the fittings for my new bathroom and I'm trying to find a combo toilet/ vanity unit. The one i'm looking for is the darky navy one the second image on the gallery on mabathrooms .co.uk . I spoke to the guy who owns ma bathrooms and he said that the customer...
Does anyone out there have a JTP shower or JTP taps installed? (previously known as Just Taps Plus).
Have you found a JTP shower and taps durable and reliable for years after installation? And straightforward to install?
JTP is being offered by a number of our local bathroom retailers and...
My Irwin pipe bender has lost the retaining nut for the central bolt and the 12mm we have on site aren't the right pitch.
Does anyone know what type of 12mm nut to get?
Irwin don't, I've asked.
No replaceable parts on their benders.
Which make is fairly foolproof? I tend to almost always go down the mechanical unblocking route but I want to leave a few bottles for a few tenants (not mine).
My house seems to be freezing and my double pvc glazing windows were installed over 20 years ago. The window seals have seen better days and there's gaps in between the window frames and window.
Not really done anything like this before as I am not a plumber or carpenter.
Does anyone which...
I know this is off topic.
However my car petrol door/ cover has come off. It needs gluing back on. I have tried gorilla epoxy glue. But it keeps falling off. It's plastic that I'm trying to glue.
Any help would be grateful.
Thanks
I'm looking for a shop/store to buy spare A/C parts in Lewisham. I'm looking for a compressor and electric board, if anyone knows of where to get them please let me know
Ive looked at the tech specs and it seems that the REMS has a lower flow rate but higher pressure at 5.5 bar. the Kamco has a higher flow rate so i understand that will be best for flushing a dirty system, however its maximum pressure of flow is under 2 bar. I wish to use a mashine for...
I recently moved into a flat with a Worcester Bosch CDi 35 Compact (or Classic System maybe?) and the thermostat on the boiler was broken (the thermostat was visibly damaged). I replaced it with a Drayton LP20RF receiver and thermostat. The boiler guy came round once other work was completed to...
Hi, the 15mm pipe work to my shower use compression fitting, the elbow joint which is in the wall and the pipe comes out and in to the shower is lose and water has been leaking in to the clinker wall. is there a deep socket size 24mm that i can use to retighten the compression nut ? as i can’t...
Does anyone out there have experience of a water CONDITIONER - I don't want a water softener installed and I wondered if these really work or just a gimmick?
I would appreciate any information/reviews from either owners or plumbers please.
I bought a Hozelock tap to hose fitting, though it doesn't fit the tap.
The diameter appears to be 22mm.
I desperately need a fitting for a hose to water some plants, as running back and forth with a watering can seems so unnecessary.
Can anyone point me to what I'm looking for...
Hi
Scenario,..... I go to install my new Washing machine and the little shut off valve has Seized solid and i can not access the mains water shut off valve,
In the past i would bend the fill pipe in half and put a jubilee clip on the bent section while im working on it.
Is there a specific...
Dear all just bought this and tried to install yesterday.
Item is rubbish. Washer missing from bt which is needed to stop bolt turning. Other 3zwasher badly made and don't got bolt heads.
Spent ages making own new washer and hammering bits to fit washers.
In hindsight should have returned...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.