We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications.
Just reply to this thread...
Looks interesting and innovative but falls short imo. Integrated rubber washer to basin waste is good as you can't knock it off and loose it down the back of the carcass but the rubber is thin and less forgiving than my "go to" macalpine . It also fails on the integrated connection to waste...
My house seems to be freezing and my double pvc glazing windows were installed over 20 years ago. The window seals have seen better days and there's gaps in between the window frames and window.
Not really done anything like this before as I am not a plumber or carpenter.
Does anyone which...
Hi I am trying to replace my bathroom tap with a new one, I am trying to remove the existing rusty flexible tap connectors from this bit of 22mm copper pipe.
But this thing is not budging at all its like its welded or super glued on, I am using some water pliers on both points here but its not...
Hi,
I after opinions on which M Class dust extractor is better for coreing holes when using a dust extraction adaptor. I have narrowed it down to either the Bosch GAS35 AFC or the Metabo ASR35.
Any one used them both?
Im a plumber mostly small bore houses etc. I have never used the Knipex Cobra Pliers Wrench. And dont know whether to buy a 7 inch or 10 inch. Hard to tell from picture on computer. Can anyone advise ?
I've been trying to get hold of one of these for the last week or so for a customer. Almost every supplier that sells them don't have any at the moment. So far I've only come across two that did. One refunded after two days without any explanation. The other I placed an order with I've not had...
I need such a spanner to remove a failed IH, and to install a replacement; in a domestic hot water cylinder made by Opus (Cyprus).
I am aware that in general the distance across the flats may vary somewhat from brand to brand, despite all having 1.5" BSP threads.
In my case, both old and new IH...
So it is time for me to scrap my vivaro which has just be written off my the insurance company after someone crashed into the van while parked. Lucky as I was just going to dump it this yr any way. Will be sad as have had it for 12yrs.
Any way, need to get a new one which complies with euro 6...
Hi, got a porcalenosa mixer shower that i need to replace the valve on it. Not sure what tool is used on it as it looks unusual. please see photos with details
many thanks
so I am in need of a new tool bag or 2 as all the zips on my are knackered and it is weighing over 20kgs which is starting to hurt my shoulder lugging it around.
I know people like the veto's but the bags themselves weigh 4.5kgs. Ideally I need a lightweight but strong bag or bags?
I have...
Hi,
I recently opened the packaging of a new wood cutting semicircular cutter
for my Dewalt multicutter tool. As I was recycling the packaging, I came across this black piece of metal taped to the card in the packaging.
I have no idea what it is for and the impression I get is that I...
Hi, I'm about to install a UV water treatment and filter system with 3/4" brass connectors. So I need to buy MDPE pipe connectors, bends etc. I wondered what folk thought about Plasson, FloPlast, Other connector types, especially the plastic to copper connectors, which I believe strip easily...
Hi
Scenario,..... I go to install my new Washing machine and the little shut off valve has Seized solid and i can not access the mains water shut off valve,
In the past i would bend the fill pipe in half and put a jubilee clip on the bent section while im working on it.
Is there a specific...
Dear all just bought this and tried to install yesterday.
Item is rubbish. Washer missing from bt which is needed to stop bolt turning. Other 3zwasher badly made and don't got bolt heads.
Spent ages making own new washer and hammering bits to fit washers.
In hindsight should have returned...
Everyone needs one of these, not just for your tools, it is 24hr tracking regardless of what property you are trying to keep hold of, just connect it to a cheap tool such as a torch and leave it in PLAIN Sight, it WILL be stolen with your precious personal items, and you WILL find them. Prices...
After not doing plumbing for alot of years my tools could probably do with an upgrade eg my bacho 10,12 inches open about as wide as a 6inch wide jaw now.
I see the armeg jaws for taps so probably going pick up them.
Also see knipex adjustable wrench that looked good.
Any tool ideas to make life...
Ordered a rip off makita drill a while back and used it for the first time today, its solid and performs better than my apprentices ryobi so if anybody is on a tight budget figured this might help you out. Just be warned it took ages to get here as the company ships them from china, they're...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.