Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Threads
- 28
- Messages
- 32
- Views
- 19.6K
Hi Folks,
Just saying hello. I do tackle the odd plumbing job when I can't get hold of a professional plumber, which I'm sad to say is quite often these days. We've moved out to Suffolk near Halesworth and have not managed to get a single local plumber at all for simple tasks. I've had one...
Looking for a Heating Engineer in Westbury, Wiltshire (BA13) to change a Radiator valve in our kitchen. It was leaking, have tightened but it is not sitting correctly against the pipe.
Also to check as now getting lots of 'gas' in the system
I'm looking for an Heating Engineer/Plumber working in West London who can rebalance the UFH provided by my 20 yr old Wavin (formerly Osma) manifold.
At the moment two of the rooms are overheating. I can't get the actuators, which have come off, back on. And one of the rooms is underheating...
Hi all,
I am a 22-year-old building services engineer apprentice (SVQ Level 3). Looking for unpaid work/labouring and experience in any aspect of Plumbing and Heating I can work any evenings/weekends and maybe some day-time weekdays. I have a CSCS Card and C&G level 2 6035 diploma I am...
Saw a photo a customer showed me of what seemed to be a flexi installed on an expansion vessel serving a small electric water heater by someone he found who was cheaper than me. I say 'seemed to be' because I'm not sure from the angle of the photo whether the flexi was attached to the vessel or...
Use Coupon Code: WERA25
BUY HERE
I have a Greenstar Comfort 11 RF controller and I am trying to set the holiday function.The problem is, at the end of the setup procedure do I leave the controller in the OFF position or the Auto position? I ask this because if it's the OFF position one can't set it until your about to leave...
- Question
One circuit of our 30 year old Florad UFH system is not heating up. New pump fitted and send pipes v hot and return pipes good an warm. But floor not warming at all. V puzzling. Advice and / or help needed. NR21 area.
Hi
I wonder if anyone could help.
We have a nest heating system that we have had for 9 months, it had been working fine up until 5 days ago. Since Wednesday evening it has worked very sporadically. When it’s not working we can’t even get it to come on with the manual button on the heat link...
Hi everyone, can anyone can identify this shower mixer?
It is written TOP NORM on the valve body.
Thanks for your help!
Alex
hi, our timer screen has gone blank completely so cant set times temperatures date or anything!
Can this be replaced easily by us? Or do we need the gas engineers out?
Can we order replacement online..looks like this model is no longer available.
Thanks in advance!
My daughter has recently moved into her first house which has a Worcester Greenstar 25Si Combi. It has an ESi ESRTP4RF Wireless Programmer/Thermostat fitted, but the wireless connection keeps dropping out.
Does anyone rate these units?
There seem to be plenty of DT20RF/LP20RF units up on ebay...
I have a Draper 34212 lever bender. I know it isn't a Hilmor but I don't bend 3/4" much so it does the job. The one thing that is difficult is bending 180 degrees. Do you guys have any tips? Obviously I can do two 90 degree bends with a gap between but often I need a 180.
I was thinking of...
Small family owned growing company looking for honest, reliable plumber in the Ft Lauderdale area. Anyone looking to move to South Florida or is located in Ft Lauderdale area send me a message.
I am having a new C/H system fitted next week. Where the boiler is to be mounted is a bare concrete block wall. Is it safe to put a plywood lining over the concrete for the boiler to mount to and, if so, what is best plywood to use? I seen a picture of a boiler mounted in this fashion which made...
I posted a while ago about changing batteries in the thing, and was helped here (30 seconds max to avoid losing settings). Since then got another problem. Went away for a week and turned the boiler off, from the thermostat, while away. This was principally because I've had issues with the...
I am urgently in need of a new boiler install in Huddersfield. My plan was to go with twin Opentherm boilers around 30KW each System is a very large listed home with currently a failed Potterton Eurocondense EC 65 KW, evoHome and pressurised water cylinder. Fan has died and is discontinued. If...
The copper pipe that connects is on the LHS (view from front) and I get a small leak every other day. Do not have to top up frequently, just wipe away.
Also has developed an occasional S.54 fault "delay mode due to flow temperature gradient too steep" which means the hot water runs cold with no...
Hi all . I am trying to remove my existing toilet seat in order to replace it.
I have removed toilet seats before , but this one has me confused. Cistern is concealed and I have minimal access to the back of the pan.
I have taken out the two allen screws but have no idea what to do next ...
Hello, if you are able to come and fix an Ecocent Maxi 3001 boiler in Llantrisant, South Wales, we would love to see you! We are told it is likely to be a capacitor or compressor problem. We also have an air source heat pump system that needs servicing if you are able to also do that, that...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 2
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 1
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 2
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 4
-
Show us your fanciest radiators you have installed!!
- Started by Lou
- Replies: 0
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 7
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
