Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Threads
- 28
- Messages
- 32
- Views
- 19.4K
I had a new Combi boiler (a Vaillant EcoTec exclusive green IQ 843) installed a few days ago replacing a previous system one. My flat has 2 bathrooms on two floors with 2 showers and 1 bath.
Heating works, and hot water mostly works as well but there's something that kicks in when we shower...
Hi
I have a permanent A21 fault on my Greenstar Comfort RF receiver on my boiler. I am unable to access the settings as it does not respond to any input from the buttons on the panel. My thermostat is showing an A28 fault. My thermostat was not working so I disconnected it from the receiver in...
Hi all
I am new to this forum so if I put in too much information please forgive me. I have a WB Heatslave 18 25 oil combi boiler. I have had it for a number of years. I know WB has a great reputation which is why I bought this boiler but it has been temperamental, to say the least.
It has...
Hi Guys,
I work for a company called SaveMoneyCutCarbon and I am recruiting for two plumbers to carry out a service contract with a high profile national company.
The link to the job ad is below, to summarise briefly the purpose of the role is to attend the client's sites across England on a...
I moved into a detached bungalow last June, and last Sept I had a problem with clanging pipes which I only heard in the early hours. This stopped in May for 4 months but returned as soon as it got colder a month ago. I've been woken by loud banging in pipes about 5 to 5.30am. A local plumber...
Hi, Looking at getting a new boiler with an unvented cylinder fitted. Our current system is an old gravity fed. Flow rate is 20l with a 1.5 bar. Its a 4 bedroom house with 2 bathrooms and 9 rads with an additional 3 rooms in the loft sometime in the future . Our first floor bathroom is very...
Hi all,
Hope you are well.
Looking for someone to convert a combi system to an unvented system. Also, at the same time renew the cold feed from a 15mm to 22mm to the tank, install 1 new radiator, and replace 5 existing radiators.
The new boiler will replace the existing boiler in a reception...
Hi , looking for a Scotland/central belt company ( not big multi)
Currently carry out lots of electrical testing etc for lots of domestic & commercial clients. Would like to offer gas cert also but not interested in starting company getting accreditation etc basicly a reciprocal relationship...
Hi all,
Having some issues with my boiler and the central heating company are struggling to resolve.
We had it serviced and it was working fine. We then had a new filling loop fitted a week later as the old one was falling apart, and since then it makes a horrific droning /vibrating noise...
Hi
I have an oil fired AGA which is only used for cooking on, it is not linked to heating system or hot water - both of which is provided by an oil boiler.
Every year when we fire up the AGA the shower runs cold after a few minutes. Water from taps is still piping hot.
Have fitted a new...
Open vented system
2 upstairs radiators need bleeding everyday
First tried turning pump speed down from 3 to 1, but problem persists.
Any suggestions would be appreciated.
- Locked
Hi, I'm in Northamptonshire 36 years old. I have a level 2 in plumbing, I can do the basics like valves, pipe bending, soldering, I'm good on the tools. I just need more experience. Anyone's needing a mate, contact me.
Hi,
my hot water cylinder started leaking two weeks ago, my landlord has British Gas cover and they were meant to be coming tomorrow to fit a new one, the cylinder got delivered this morning but they’ve then cancelled due to strike action so can’t come for another two weeks which in the...
Has anyone here had much experience with the old Velta (now upnor) UFH systems
I have a customer who has a few issue and i'm trying to find some info.
I've managed to download the settings doc to see the installer settings but not sure how to get into the settings menu on the Veltamat 3D unit...
-
- Locked
Hi all
just a quick post,my name is mark and I’m currently in collage doing plumbing on an evening course, But I’m looking for someone to shadow to gain valuable experience to go hand in hand with with my lvl 2.
I know I will be doing a lot of the tool carrying etc but I don’t mind as long as...
- Locked
My boiler has tripped out showing F23, British Gas came out two weeks ago cleaned out the pump and it worked but now has tripped out again. I need someone who can give the system a power flush. It is an open system with a hot water tank. Many Thanks in Christchurch BH23 4ER
-
- Locked
Looking a reasonably priced plumber to replace unvented hot water like for like in second floor flat. Please message for details or to quote please.
We've basically got to grips with the Vaillant vSmart app, but there's just one thing that puzzles us. When you view the charts, what do the "Heating Operations" bars actually represent? They're shown as percentages, but this doesn't relate to the flow temperatures on the boiler in any way. For...
- Locked
Dan submitted a new resource:
Bodge it 'n' Dodge it - We have a really fast van for doing one after we have said we are finished
Read more about this resource...
Creating content since 2001. Untold Media.
