Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Threads
- 28
- Messages
- 32
- Views
- 19.5K
I'm looking for a quote to get a radiator moved to an adjacent wall in the Cardiff area. None of the recommended plumbers I've contacted have got back to me. Must be busy. If you're interested in this small job, please get back to me & & send more details.
Anybody else a member of checkatrade? Have they changed your telephone number?
I thought it was odd that the phone calls Had checkatrade said before being able to answer.
Am I right in being fuming about this I pay over a grand a year to this lot to advertise MY details and they have changed...
I retired from plumbing about 18 months ago but i'm bored and could do with a bit of extra cash.I live in London,I no longer have a van but i can travel for nothing on buses and tubes etc.I got myself an old codgers shopping trolley that i can put my tools in.I only want straightforward easy...
Hi all. Hope you are keeping well. I have an old client in the Ealing area that wants the bathroom done starting at the end of July.
If anyone is keen pm me and I can give you his number.
Thanks
Bought a bottle today as seen a few people raving about it online and I use Loctite 55 all the time.
Anyone used it? Any tips for using it?
- Locked
Good Afternoon.
I am looking to gain experience in plumbing I did a short bathroom fitting course last year and learnt the basics and I’m looking to build on what I learnt.
I am offering free labour to gain knowledge in plumbing if anyone is interested!! I’m looking for a career change...
Hello all. I can’t stand my dripping tap any longer so trying to replace a cartridge. It’s a mono block mixer tap in the kitchen.
I can take the headgear off no problem but the cartridge is recessed inside the tap housing - can’t a spanner to it, and it doesn’t look like there’s enough...
Hi,
I have a Gledhill Boilermate 2000 system installed in my house which seems to have a fault. The local plumber that I have looking at it is wanting to replace the whole system which I am not sure is necessary. He has suggested that I contact Gledhill Technical support but at £1.50 per minute...
The flue runs up from the boiler into the attic. There are then two 45 degree elbows before the flue runs out to the rroof.The flue runs parallel from the boiler to the bit going out of the roof with an angled bit in-between. Where by regs should the brackets go and how many will be needed?
Hi Everyone,
to cut a long story short i have a customer that has had problems with pressure in their heating system. i have got the system to stop dropping pressure then they spotted a small leak from a manual air vent on cylinder flow to coil.
I replaced this with a auto air vent and left...
Price and availablity for a Megaflow CL170 Annual Service Portsmouth. Thanks.
I'm fitting a wall hung toilet using a Grohe frame and would appreciate advice on connecting the waste to the soil stack (to the right in the image). I am planning to connect the Grohe supplied waste (black pipe) to the stack using solvent weld pipes (don't trust the push fit not to leak) - the...
Hi There!
It's a great day at Master Blaster Plumbing and Drain LLC!
We are hiring Plumbing and Drain Technicians that already possess Plumbing and Drain Cleaning Service experience.
Requirements:
You must possess the following to be considered for hire;
-Professionalism, Honesty, Integrity...
I'm looking for a contractor who can get to Harrow (HA5) and who knows their way around a Grohe F digital wireless shower controller. Grohe customer services say that it needs a software update.
Hi
I finished level 2 and I am looking for a job in if someone here in this forum needs a plumber mate I am available, I need to gain more experience to apply for NVQ in the future, as everyone knows the college does not give us all the experience to be a plumber, I can install clips...
Hello, i have seen there are a few recent posts about this, but am in the same situation as the others but in different areas.
I am a 29 year old male and have recently completed my C&G level 2 diploma in plumbing and heating at college. I am very keen on learning further about plumbing and...
I am about to start a training course to become Gas Safe qualified. As part of the training I am required to work with a Gas Safe engineer and for them to sign my portfolio.
I appreciate to start with I may be a slight hindrance, however in return for this I will offer my labour for free. I...
My boiler is over ten years old now and last time I had it checked I asked the engineer about getting it replaced. He initially said no problem, but then discovered that the supply pipe is 15mm and apparently modern boilers need 22mm?
Unfortunately the gas pipe enters my house at the front, and...
Growing plumbing & heating company based near maidstone in kent, looking for reliable and experienced gas safe heating engineer & plumber/heating engineer.
van, uniform, PAYE & pension provided
plumber 30-32k per annum - mon-fri
gas engineer 38-40k per annum - mon-fri
send me a message if...
PLUMBER JOB OPPORTUNITY! If you are an experienced plumber looking for work in the Lancashire area, we'd love to hear from you.
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 2
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 1
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 2
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 4
-
Show us your fanciest radiators you have installed!!- Started by Lou
- Replies: 0
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 6
-
Unvented discharge at high level current regs
- Started by Matt0029
- Replies: 11
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
