Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Threads
- 28
- Messages
- 32
- Views
- 19.5K
Looking for plumbing experience in Birmingham Walsall areas got all my lvl 2 certs
Hi, Our new house has no thermostat on the cylinder so our water is scalding hot all the time. Anyone interested in this little job?
Hi! :) I'm on the hunt for a house and one of them which looks incredibly promising has a solar installation - I don't know a whole lot about these so I was hoping to get some advice on 'best practices' with solar panels. I'm also wondering how putting power back into the grid works - does it...
Hi, I’ve a Rayburn 400K (cooker only) with an Ecoflam burner.
When trying to start it purges but then goes to lock out.
Sometimes there is the clicking sound of the spark, other times nothing. I’ve checked for loose wires, replaced the electrodes and set the gap.
Now thinking it’s fuel...
Good evening you marvellous lot!
So, i have a client that wants the Vaillant pure combi boiler (my go to rear flued boiler), with a Nest controller.
As far as I can tell, there is no easy way of making these 2 work easily together. The only way I can find is to use the following thingy...
Anyone else had a bad experience with these?
I bought one on the premise that one part fits most and stuck it in the van. Then, appalled that a spare diaphragm washer for it was expensive and rare, I decided against fitting it in any customer's house and it eventually ended up in my own toilet...
Hi Everyone
I am fitting an air admittance valve to a stack pipe in a bathroom, see pictures. A separate washbasin waste pipe and bath waste pipe are also connecting to the soil pipe.
I have fitted an anti syphon trap to the washbasin and a HepVo to the bath
My question is
Is there a...
Hello,
I have open vent old Ideal boiler (in the kitchen)with open vent hot water cylinder.(on first floor cabinet)
We would like to change the boiler to Vaillant Ecotec Plus 624 system boiler and 210i unvented indirect Megaflow cyclinder.
How much it will cost the labour? How long it will take...
Hi
I’m replacing all my Cooper / steel pipes and cylinder in my 1950 bungalow due to a leak so decided update the bungalow save problems later
looking for a plumber to replace the main stopcock and replumb a new bathroom suite with a built in shower and new compressed cylinder tank I have...
The tap was leaking from its body (under the 2-way swivel handle; where you access the big brass nut and the cartridge) when turned ON more that a little bit. I've replaced the cartridge and it leaks in same way.
It doesn't drip from the spout nor leak when turned off. So, as far as I can see...
I'm looking to replace my combi boiler and have probably decided on an Atag boiler - IC Economiser 35 plus.
I cannot decide which smart controller to go for - either Atag One or something similar like Nest.
Can anyone help me out in choosing please?
Looking for a plumber to install a tank and pump to overcome low supply issue. I have been recommended to use the DAB system https://www.anglianpumping.com/product/mains-pressure-boosting-systems/dab-e-sybox-with-e-sytankon this forum. I understand that this would be a day's job. Please let me...
I’m fitting a Wood Burner Back Bouler which has 18mm pipes. I needc an Adaptor to 22mm. Any one know where I can get them?
Many Thanks in advance.
Looking for experience in Birmingham working with a plumber, I’ve got around a month of experience shadowing a plumber. I’ve completed my level 3 plumbing course not to long ago. Please be in contact thank you for you time.
Hi, and thanks for any advice before I start, I'm looking to buy a press fit machine but getting a bit bogged down in detail, I have searched the forum and found a few good posts but nothing specific to what I am looking for.
Questions I would like to know the answers too are:-
1. Can they be...
Hi all,
My push up plug in the bathroom sink is stuck. Please can you let me know if you are able to fix it and how much it will cost? I am in the Purley (near East Croydon) area.
thanks,
Nav
Hi everyone, i was wondering if there was anyone out there that would be able to help me, im currently doing my C&G plumbing level 2 course and i am looking for someone i could work/labour for 1 day a week so i can gain some work place experience / knowledge. Im happy for this to be unpaid. I...
Hi I’m Ben and I’m 19 years old. I have completed level 2 and level 3 plumbing studies and am seeking a plumbing trainee job to gain practical experience. I’m hard working and reliable. If anyone knows of any positions available please in Milton Keynes, northants, Bicester, Brackley Banbury...
Hi,
Looking for a G3 qualified and experienced plumber to take a look at one of our Heatrae Sadia multipoint 50 units sited above ceiling in office toilets,we have an issue were there is constant running water through the tundish.
B31 area.
cheers
Hi folks,
I've fitted 3 new urinals supplied with cistern,auto siphon etc. Now when I first fast filled the system everything was ok,water flowed into all 3 urinals perfectly,now since that,the cistern just fills up & overflows outside.Ive changed the siphon & same again.Ive took the cistern...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it- Started by sammie81116
- Replies: 3
-
-
-