Questions and plumbing advice in the Oil and Solid Fuel Forum - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Green star oil combi heat exchanger noise day and night water whooshing /gurgling
Evening All,
We've just moved into gas boilers (after years doing gas) and are currently tooling up. On our first install we had problems bending the 10mm plastic coated, white pipe. Possibly because of the sub-zero conditions the covering shattered when we bend it by hand. It measures 12mm...
Hello have issue with Firebird enviromax C26 its doest want to start for what ever reason it tries but cuts off almost instant and keeps trying until i switch off power
I have just bought a Danesmoor greenstar12-18, fitted with Reillo RBD burner. Worcester notes should be used with C2 Kerosene, is it possible to run on 35 sec low sulphur diesel instead? Any advice is very much appreciated thank you.
We have an outdoor Worcester Bosch Greenstar 25/32 Oil Fired Combi.
We are getting a random lockout fault, code 855 9F. Pushing reset sorts it for a while sometimes an hour sometimes 4 hours.
I can't get hold of the engineer that installed it. Is there anything I could try until he responds...
Can anybody explain why I could get heating oil for 72p/l last Monday but by Friday was being asked 92p/l? The word profiteering comes to mind especially when nearly 50% of the cost is taxes in one form or another and the pump price at Asda for my diesel has been steady for a couple of weeks now.
Probably been asked before but cannot see where. Inside my boiler there is written nozzle 1.25 x60 W. In an envelope attached to boiler is a new nozzle marked 1.25 x 60 S are they compatible? Boiler is an old Boulter Camray.
Hi all, all new to this breakdown life, currently waiting on getting on a training course, so just been relying on technical and instructions since I passed my oftec.
The current boiler is a two pipe line off a tiger loop.
I went to a Grant vortex boiler last week where the boiler went into...
Please help
Our Grant Vortex Pro oil combi boiler seems to have developed a drip from some sort of valve where it looks like there's a limescale build up. There is no water at all from hot tap and no pressure in the boiler. The heating works fine however.
Is there something I can do or should...
Hi - I've had some conflicting advice so looking for confirmation please - what size should a heat sink radiator for a log burner/boiler be? I've been told by one installer 10% of output to water and another 20%. I can;t find aything in building regs and can;t find a HETAS document with that...
Hi,
We had our annual oil burner service carried out by a well known Norfolk firm last Thursday and all was great for a day. Came home from work on Friday evening to find our 15+ year old HRM Wallstar burner had locked out. I pressed the lockout button only to find it would lockout 1 to 2 mins...
The Blue CPCS Competent Operator Card is an ID and competence card provided by the CPCS. It demonstrates that an individual has met certain health and safety requirements and that they are qualified in their occupation as a plant worker. It is the next level up for sale .It is the you progress...
The boiler (480k, serviced every year) will not turn off at the end of the 3rd timed cycle each day, even though the green 'on' light is out. This happens when set to 'heat and hot water'. Switching to 'hot water' only, turns it off. Engineer called three times and has replaced the control...
Camray 5 (90A) (20 year old) oil boiler, had a noisy fan on the boiler so investigated, just a bit of dirt in the casing however, having removed the burner unit I replaced the Burner Nozzle no problem, old was very dirty and sooty. Found the boiler wouldn't fire up. SO rather than than mess...
Camray 5 (90A) (20 year old) oil boiler, had a noisy fan on the boiler so investigated, just a bit of dirt in the casing however, having removed the burner unit I replaced the Burner Nozzle no problem, old was very dirty and sooty. Found the boiler wouldn't fire up. SO rather than than mess...
I have recently moved into a house with a central heating system that runs from oil or/and the multi fuel stove. The water gets hot and then circulates into the connect radiators but they aren't hot just warm and don't stay warm continually. Any advice get my log burner between 300-400 range...
Evening Gents. That time of year again the wife has demanded the CH Be turned on.
However, im having an issue with it - It simply isnt turning on.
The LED On the front panel illuminates to suggest the CH Has been turned on by the boiler, but nothing happens.
The HW works perfectly normal.
If...
Looking for help identifying a photocell for an old Myson Velaire oil boiler. The current photocell is a danfoss 057h202d type D photocell, which I can’t find listed anywhere. So I would be very grateful if someone might know which current photocells might be compatible.
Regards
Michael
Hi. Currently experiencing an issue with our oil fired central heating system. When CH/HW is switched on, the central heating does not always work - the hot water does however without fail. We had the timer set to come on last night but alas, only the H/W came on. After a couple of hours of...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 3
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-
-
Sewer pipe problems not sure about it- Started by sammie81116
- Replies: 3
-
-
-