Search the forum,

Discuss Work experience in gas advice please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
11
Morning peeps,
First post so don't really know how the forum works so please be gentle!!!

Soon to be made redundant however have been given an unconditional offer to do level 3 diploma in gas engineering at local college starting in summer 2019.

Until I start this course I have managed to secure work experience with a major firm for 1 day a week plus they are keen to take me on placement from college. They are asking what I need to do for college and I don't know what to say?? I know I need to do commissioning/de-commisioning etc but was wondering if anyone can give advice on anything I should focus on primarily so I can hit the ground running when college starts as in go with Central heating installation squad or fault finding etc etc

I will have roughly 40 days on the job experience so hopefully can pick up a few helpful bits and pieces by then. Oh and it's domestic I'm doing not commercial.

Thanks in advance for any advice and apologies if anyone offended by my not doing a 4 year apprenticeship.

Regards, mattjam
 
Have you any experience in plumbing and heating eg qualifications?
 
TBH I would do lv2 first then it's the start of the understanding and design of a heating system and waste systems etc
 

Reply to Work experience in gas advice please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Just started gound work on self build bungalow and wondering best way to do below ground soil pipes. For toilet I was going to go straight down through slab and out through deadwork into a manhole. I will work out falls from manhole and set the height of the waste water system as required. For...
Replies
2
Views
111
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
264
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
472
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
338
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
189
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock