Search the forum,

Worcester CDI pcb assy complete

Post new thread

Discuss Worcester CDI pcb assy complete in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
K

Kev the gas

Bit of a strange one this chaps,

A complete front panel off a new Worcester Bosch cdi combi, complete with PCB & pressure gauge.

Brand new including spark generator never been fitted.

IMG_1849.jpgIMG_1850.jpgIMG_1851.jpg

Offered here first before Ebay, anyone £ 50 plus postage

Kev

07739941663.
 
Status
Not open for further replies.

Reply to Worcester CDI pcb assy complete in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
122
Lou
Lou
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
245
exedon2
exedon2
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
186
Timmy D
T
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
203
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Plumbers Forum - Plumbing Advice
DIY Advice
Tiling Standards BS5389
Electrician Talk Forum
Tiling Advice Live
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock