Search the forum,

Discuss Wet vac in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

helpsy

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,754
What is a very good quality wet vac? Had a Wickes one at about £40 and a Karcher one at £200, both spew out water. I don't mind paying good money for a good product.
 
Titan TTB350VAC 1300W 9.46/4.54Ltr Wet & Dry Vacuum Cleaner 240V | Wet Dry Vacuums | NoLinkingToThis

I got one of these months ago as a get me out of trouble/throw away job......still going strong now!
Dont use it so much for wet vac now but when I do it's been great!
 
numatic, george, mines 5 years old and to date never spewed water :) around £300 worth every penny
 
Vac king from Machine Mart around £80, been using them for +6 yrs, stainless steel tank with drain cap low down. Only downside is they leak where the hose joins the tank so use PTFE tape when assembling from new and you will be ok. Can be used wet or dry.
 
Status
Not open for further replies.

Reply to Wet vac in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
173
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
469
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
304
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
224
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
180
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock